Marantz SR8002 Recalling a Preset Station, Preset Channel List Display, Sorting Preset Stations

RECALLING A PRESET STATION

TV	DVD	VCR	DSS		CH	VOL
TUNER	CD	CD-R	MD	1.	2.
TAPE	LIGHT	AUX2	AMP
	AUX1					OK
1			2
	RC8001SR
	Learning Remote Controller

LIP.SYNC

PREVMUTE

GUIDE

(Using the unit)

4. You can fast forward the preset stations, press the CH+ continuously.

5. When the desired preset station is received, cancel the preset scan operation by pressing the CLEAR button or P-SCAN (D4) on the remote controller.

PRESET CHANNEL LIST DISPLAY

4. Up to 10 channels can be displayed at a time. If there are more than 10 channels, press P- INFO (D5) on the remote controller once more to display the next page.

The list display will disappear automatically in 5 seconds.

SORTING PRESET STATIONS

AV SURROUND RECEIVER SR8002

SURROUND

DIGITAL

AAC

ENGLISH

1. Select the desired preset station by pressing the 1 or 2 cursor buttons on the front panel.

A complete list of the broadcast channels stored in this unit can be displayed.

CLEARING STORED PRESET STATIONS

You can remove preset stations from the memory using the following procedure.

(Using the remote controller)

1. Press the TUNER button twice within two seconds on the remote.

2. Press the CH+ or CH– button to tune in the deseired preset station.

Or enter the preset station number with the numeric buttons.

PRESET SCAN

						M
						D1
TV	DVD	VCR	DSS				2.
						D2
TUNER	CD	CD-R	MD	1.	LEARN
					NAME	D3
TAPE	AUX1 LIGHT AUX2		AMP		MACRO	D4	4.
1			2		USE	PAGE 1 2 3 4	2.
		RC8001SR				D5
	Learning Remote Controller

1. Press the Tuner button on the remote controller twice within two seconds to switch to the TUNER function.

2.

SURROUND

DIGITAL

AAC

3.

TEST	CH.SEL	SURR
1	2	3
7.1CH	ATT	SPK-AB
4	5	6
DISP	OSD	SLEEP
7	8	9
	THX
CLEAR	0	MEMO

TV DVD VCR DSS

If you have stations memorized, and there is a gap in the sequential order:

I.e. the stations are stored as follows

1)87.1 MHz

2)93.1 MHz

3.3) 94.7 MHz

10)105.9 MHz

2.	(notice there is no stations programmed for pre sets
	for 4-9), you can have pre set 10 become pre set 4:

To sort the numbers, press and hold the MEMORY and the 4 cursor buttons.

“PRESET SORT” will appear on the display and

M

CHVOL

2. Press > on the remote controller to display

sorting will be done.

LEARN

NAME

MACRO

USEPAGE 1 2 3 4

TUNER CD CD-R

TAPE AUX1 AUX2

LIGHT

1

RC8001SR

Learning Remote Controller

D1

D2

D3

D4

D5

MD

AMP

2

2. 4. OK 5.

2.			LIP.SYNC
		PREV		MUTE
			GUIDE
		MENU		EXIT
		TEST	CH.SEL	SURR
1.	4	5	6	5.
	DISP	THX	SLEEP
		OSD
	7	8	9

CLEAR 0 MEMO

PAGE2, then press P-INFO (D5).

3. The list of preset channels will be displayed on the screen of the TV monitor connected to this unit.

PRESET LIST

NO . 1 FM 87 . 10 MHz

NO . 2 FM 93 . 10 MHz

NO . 3 FM 94 . 70 MHz

NO . 10 FM105 . 70 MHz

RETURN NEXT EXIT

1. Recall the preset number to be cleared with the method described in “Recalling” a preset station.

2. Press the MEMORY button on the front panel or press the MEMO button on the remote.

3. The stored preset number blinks in the display for 5 seconds. While blinking, press the CLEAR button on the front panel or the remote controller.

4. “xx CLEAR” appears on the display to indicate that the specified preset number has been cleared.

(Using the remote controller)

1. Press the TUNER button twice within two seconds on the remote controller.

2. Press the > button until PAGE2 is displayed and press the P-SCAN (D4) on the remote.

“PRESET SCAN” appears on the front display and then the preset station with the lowest preset number is recalled first.

3. Preset stations are recalled in sequence (No.1

On the SR8002, multicast channels are also displayed, as shown below, when an HD Radio channel is set to the preset channels.

PRESET LIST

NO . 1 FM 87 . 10 MHz

NO . 2 FM 93 . 10 MHz

NO . 3 FM 94 . 70 MHz

NO . 4 FM 94 . 70 MHz - 3

NO . 5 FM 94 . 70 MHz - 4

NO . 10 FM105 . 70 MHz

Note:

•To clear all stored preset stations, press and hold the CLEAR and the ENTER buttons for two seconds.

→No.2 → etc.) for 10 seconds each. No stored preset number will be skipped.

In the list of preset channels above, preset numbers 4 and 5 are the multicast channels for preset number 3.

69