Recording AN Analog Source

ENGLISH	OTHER FUNCTION
	OTHER FUNCTION
	DISPLAY MODE

AV SURROUND RECEIVER SR8002

		LIP.SYNC
	PREV		MUTE
		GUIDE
SURROUND	MENU		EXIT
DIGITAL	MENU		EXIT
AAC	TEST	CH.SEL	SURR
	TEST	CH.SEL	SURR

1 2 3

7.1CH	ATT	SPK-AB
4	5	6
DISP	OSD	SLEEP

7 8 9

THX

CLEAR 0 MEMO

In normal operation, the audio or video source selected for listening through this unit is sent to the record outputs.

This means that any program you are watching or listening to may be recorded simply by placing machines connected to the outputs for TAPE OUT, CD/CDR OUT, VCR1 OUT, and DSS/VCR2 OUT in the record mode.

To record the input source signal you are currently watching or listening to

SELECTING ANALOG AUDIO INPUT OR

DIGITAL AUDIO INPUT

	M
	D1
	D2
	D3
	D4
USEPAGE	4
	D5

CH			VOL
TUNER	CD	CD-R	MD
TAPE	AUX1	AUX2	AMP
		LIGHT
1			2

RC8001SR

Learning Remote Controller

LISTENING THROUGH HEADPHONES

This jack may be used to listen to the unit’s output through a pair of headphones. Be certain that the headphones have a standard 1/4” stereo phono plug.

Note that the speakers will automatically be turned off when the headphone jack is in use.

AV SURROUND RECEIVER SR8002

You can select the display mode for the front display of the unit.

To select this mode, press the DISPLAY on the remote controller or the front panel.

When this button is pressed, the display mode is switched in the following sequence.

Input Mode → Surround Mode → Auto display OFF

→Display OFF → Normal Mode → Input Mode

Normal Mode:

Displays the selected input function. If the function has been renamed using the Function Rename feature (see page 44), the renamed name appears on the display.

Input Mode:

Displays the input mode set via the Function Input Setup feature (see page 43).

Surround Mode:

Displays the status of the selected surround mode.

Auto Display Off mode:

The display is off. But, if you make a change to the unit such as the input or surround mode, the display will show that change, then go back to off after about 3 seconds.When changing the volume, it is not displayed.

Display Off mode:

The display is off completely.

Note:

•Only the DISP indicator will be illuminated on the front display in display off condition.

AV SURROUND RECEIVER SR8002

1.	TV	DVD	VCR	DSS
1.	TUNER	CD	CD-R	MD
	TAPE	AUX1	AUX2	AMP
			LIGHT
	1			2

RC8001SR

Learning Remote Controller

1. Select the input source to record by turning the INPUT FUNCTION SELECTOR knob on the front panel or simply press the input selector buttons on the remote controller.

The input source is now selected and you may watch or listen to it as desired.

2. The currently selected input source signal is output to the TAPE OUT, CD/CDR OUT, VCR1 OUT, and DSS/VCR2 OUT outputs for recording.

3. Start recording to the recording component as desired.

If you have already assigned the digital inputs, you can temporarily select the audio input mode for each input source as following procedures.

Press the AMP button and press the > button until PAGE4 is displayed. Press the A/D (D3) button. When this button is pressed, the input mode is switched in the following sequence.

Auto → HDMI → Digital → Analog → Auto

Auto mode:

The types of signals being input to the digital and analog input jacks for the selected input source are detected automatically.

If no digital signal is being input, the analog input jacks are selected automatically.

HDMI mode:

HDMI mode can be selected only when an HDMI input has been assigned as an input source. When “HDMI AUDIO” under PREFERENCE of the SETUP MENU is set to “THROUGH”, the HDMI mode cannot be selected.

Digital mode:

The input signal is ﬁxed to an assigned digital input terminal.

Analog mode:

The analog input jacks are selected.

This selection is temporary and will not be stored in memory.

To store changes to the input mode, select “1. INPUT SETUP” from the MAIN MENU. (See page 43)

Note:

•When using headphones, the surround mode will change to STEREO and Dolby Headphone by MENU and Cursor button.

•The surround mode returns to the previous setting as soon as the headphone plug is removed from the jack.

SR7002, SR8002 specifications

The Marantz SR8002 and SR7002 are two of the most acclaimed receivers from Marantz, a widely respected name in the high-fidelity audio and home theater industry. These models embody a blend of advanced technology, exceptional sound quality, and aesthetic design, making them ideal for audiophiles and home theater enthusiasts alike.

The SR8002 stands out with its impressive 7.1 channel configuration and powerful amplification capabilities. It uses a unique current feedback amplifier design, which ensures a wider frequency response and lower distortion, delivering a more dynamic soundstage. The receiver offers 130 watts per channel, guaranteeing ample power for driving even the most demanding speakers. Support for various audio formats such as Dolby TrueHD and DTS-HD Master Audio further enhances the listening experience, providing immersive sound particularly suitable for high-definition movie playback.

In terms of connectivity, the SR8002 is equipped with an extensive array of inputs and outputs, including seven HDMI inputs which support 1080p and 4K resolution pass-through. This makes it compatible with an extensive range of devices, from gaming consoles to Blu-ray players. Users can also enjoy video upscaling through the built-in Faroudja DCDi Cinema technology, which ensures that lower resolution sources are enhanced for a more detailed viewing experience.

On the other hand, the SR7002, while slightly older, is not to be overlooked. It features a 7.1 channel setup as well, but with 125 watts per channel, ensuring it still delivers superb performance. The SR7002 is particularly recognized for its high-quality Dolby Digital EX, DTS-ES, and other multi-channel audio formats, which enhances the listening experience. The sloped front panel design and the high-grade components used contribute significantly to its durable build and sonic performance.

Both models include features like Zone 2 and Zone 3 outputs for multi-room audio setups, allowing users to enjoy different audio sources in different rooms simultaneously. The inclusion of Audyssey MultEQ technology in both receivers automates speaker calibration, optimizing the sound field according to the room's acoustics for a more balanced audio experience.

Aesthetically, both receivers have a classic Marantz look with sleek lines and a distinctive gold and black front panel design, which could seamlessly blend into any home entertainment setup. The combination of their advanced technologies, robust build quality, and user-friendly interface ensure that both the SR8002 and SR7002 maintain their status as favorites among home theater aficionados and those who appreciate high-fidelity audio.

OTHER FUNCTION

DISPLAY MODE