Compaq 326817-003 manual Features

Page 12

1-2Compaq DAT AutoLoader Reference Guide

Features

The Compaq 20/40 GB DAT 8-Cassette AutoLoader offers the following features:

Any DDS-1, DDS-DC, DDS-2 DDS-3 or DDS-4 cassette can be read or written to, whether data compression is switched on or off.

The drive is capable of additional sophisticated techniques of error-correction for dealing with cassettes, which are not up to specification.

When using DDS-4 media, the drive reads and writes the DDS-4 format with a much higher capacity.

An improved internal cleaning sweeper reduces the frequency of cleaning the heads by a factor of eight.

The TapeAlert feature allows software and operating systems to warn users of conditions which may occur, such as a cassette nearing the end of its useful life, and to recommend actions that the user can take to recover from the situation.

A Liquid Crystal Display (LCD) gives clear and comprehensive indications of the status of the DAT AutoLoader.

A low-cost magazine carrying up to eight DDS cassettes, giving a magazine capacity of 320 gigabytes for DDS-4 cassettes using 2:1 data compression.

Compatibility with the SCSI-2 Medium Changer command set.

A common SCSI-2 interface for the drive and changer.

A standard 5 1/4-inch full-height form factor.

A cassette odometer displaying the amount of cassette used.

Image 12
Contents Compaq DAT AutoLoader Page Contents Installation Appendix B Index About This Guide Text ConventionsSymbols in Text Symbols on EquipmentRack Stability About This GuideGetting Help Compaq Technical SupportCompaq Website Compaq Authorized ResellerOverview Introduction to the DAT AutoLoaderFeatures Reliability of Backup Devices Scsi InterfaceController Requirements Capacity Projected Duty CycleData Compression Tape Drive CapacityCassette Formats Compaq Approved CassettesDDS Logo Media DDS Logo MediaWrite-Protecting a Cassette Life Expectancy of Cassettes8Compaq DAT AutoLoader Reference Guide Installation DAT AutoLoader InstallationSoftware and Tool Requirements Hardware Settings Jumper Description DefaultSwitch Settings Setting the Scsi IDScsi Jumper Pins BitSwitch Settings AutoLoader configuration switchesData Compression Definitions DC Control-1 DC Control-2 DefinitionInstalling the DAT AutoLoader Preparing the ComputerInstalling the DAT AutoLoader without drive rails Connecting signal and power cables Reassembling the ComputerConnecting the Tabletop AutoLoader External AutoLoader Scsi and options switchesCompleting the Installation 10Compaq DAT AutoLoader Reference GuideInstalling Software Drivers Device DriversMicrosoft Windows NT Microsoft Windows NTController Software Driver Information Novell NetWare Aspi SupportNovell NetWare Compaq Tru64 Unix OpenVMSSCO OpenServer Configuring the Scsi ID for SCO OpenServer SCO OpenServerSCO UnixWare SCO UnixWareSunSoft Solaris SunSoft SolarisBanyan Vines Banyan VinesOperation Introduction to Magazines and CassettesLoading the Magazine with Cassettes Labeling Cassettes and the MagazineEight-Cassette Configuration Front RearSeven-Cassette Configuration Single-Cassette ConfigurationTo Load the Magazine With Cassettes Inserting cassettes 3, 2, and 1 into the magazine SlotLoading the Magazine into AutoLoader Removing the Cassettes from the MagazineEjecting the Magazine Slide stopperForcing Cassette Ejection Stacker Mode Random ModeModes of Operation Callout Description Feature Front PanelCallout Feature Liquid Crystal Display LCDLCD Messages LCD Messages Alphabetical ListingLCD Message Meaning Type LCD Messages Alphabetical Listing LCD Message Tape Represents the number of the cassette ReadySpace Status Menu Screen Features LCD Menu ScreensLCD Menu Screens LCD Menu Screens Menu ScreenCleaning Importance of Routine CleaningErrors Resulting from Cleaning Neglect DAT AutoLoader Cleaning Recommendations Importance of Compaq-Approved Tape CassettesProcedure for Cleaning the Heads Stacker Mode Procedure for Cleaning the Heads Random ModeTroubleshooting Quick ChecklistHardware Software Installation Troubleshooting Installation TroubleshootingProblem Try This Troubleshooting After Installation For Tru64 UnixFor Novell NetWare For Microsoft Windows NT Systems For SCO OpenServer SystemsResolving Operating Problems Resolving Magazine ProblemsFor IBM OS/2 Systems Correcting Intermittent Failures Regulatory Compliance Notices Regulatory Compliance Identification NumbersFederal Communications Commission Class B Equipment Modifications Regulatory Compliance Notices A-3Canadian Notice Avis Canadien European Union NoticeJapanese Notice Taiwanese Notice Electrostatic Discharge Grounding Methods Specifications Dimensions and WeightTable C-1 Dimensions and Weight Dimension Internal AutoLoader Tabletop AutoLoaderTemperature and Humidity Range Power RequirementsAir-Cooling Requirement Suspended Particulate Table C-5Suspended Particulate Less than 150 microgram/mIndex See EOD Index TSL9000 Scsi ID#5 Enable Media Compaq DAT AutoLoader Reference Guide