Compaq 326817-003 manual LCD Messages Alphabetical Listing, LCD Message Meaning Type

4-12Compaq DAT AutoLoader Reference Guide

LCD Messages

Front panel LCD messages are provided in list Table 4-1.

Table 4-1

LCD Messages - Alphabetical Listing

LCD Message	Message	Meaning
	Type
Cassette Stuck In	Error	A cassette is stuck in the drive.
Drive
Cleaning	Status	A cleaning cassette has been loaded into the drive
in		mechanism and is cleaning the heads. The cleaning cassette
Process		will be automatically returned to the magazine when the
		cleaning cycle is complete.
Cleaning	Error	The cleaning cassette is used up. Replace the cleaning
Failed		cassette and discard the old one.
CleanReq
CleanReq	Error	It is time to clean the heads on the drive or a high error rate
		has been detected reading or writing. Move the cleaning
		cassette from the magazine to the drive (if necessary, load a
		cleaning cassette into the magazine). The cleaning cycle will
		automatically start once the cleaning cassette is loaded in the
		drive. See “Cleaning in Process.”
Drv HW	Error	This is an embedded-drive hardware error. In some cases the
Error		SCSI error code generated will be displayed on the 3rd line as
		M4sxxsxx where the xx’s represent the additional sense code
04xxxxxx		and qualifier.
Eject	Info	This is displayed when the SCSI command “PREVENT MEDIA
Prevent		REMOVAL” has been set, and the Eject button has been
		pressed. Th SCSI command prevents the cassette or
		magazine from ejecting.
Ejecting	Info	This is displayed after the Eject button is pressed and the
Magazine		magazine is being ejected.
		continued