Note
Any speakernot Configuredin the speaker system setup menuwill display N/A (not available)for the distancespecification.
STEP3
CALIBRATE THE VOLUME
Note~.~
A soundpressure/eve/(SPL)meter is nec-
essaryfor this procedure....
Toadjustindividual speakeroutputsfor prop- er balancethroughoutthe system,highlight CALIBRATEVOLUMEandpressEnter. Thecali- brate volumemenuwill appear:
Auto Noise Sequence
Set the SPLmeter to C weighting andslow responseAfter. initializing, the LEFTchannel dBsetting will be blinking, andbandedwhite noisewill be heardthroughthe left speaker. This noise will continuefor two secondsand then moveclockwiseto the next speakerin the system.Usingthe up or downscroll but- tons, adjust eachspeaker'ssetting until the SPL.meter reads 75dR. This adjustment mustbe madewhile the individual channelis blinking. Repeatfor all remainingspeakers. Whenall the speakers are set, press Previoustwice to return to the mainmenu.
Manual Noise Sequence
KNELL A+V STANDARD
- CALIBRATEVOLUME- | Set the SPLmeter to C weighting andslow | |
responseAfter. initializing, the LEFTchannel | ||
SELECTTHE CHANNELCAI~IBRATION METHOD | ||
dBsetting will be highlighted. PressEnter | ||
| ||
AUTO NOISE SEQUENCE | andwhite noise will be heardfrom the left | |
MANUALNOISE SEQUENCE | speakeras the o starts blinking. Usingthe up | |
PROGRAMMATERIAL | or downscroll buttons,adjustthe setting until | |
| the SPLmeter reads 75dR.Press Enter and | |
Highlightoneof the choicesandpressEnter.If | usethe right scroll button to highlight the |
you chooseAUTONOISESEQUENCEor MANUALCENTERchanneldB setting. Using the same
NOISESEQUENCE,the messageINITIALIZING... | procedureas before, set the CENTERchannel |
will blink while the Audio+ VideoStandard | volumeto 75 dB. Repeatfor all remaining |
loadsits internal noisegeneratorThe.follow- | speakers. Whenall the speakersare set, |
ing screenwill thenappear: | press Previoustwice to return to the main |
| menu. |
KNELL A+V STANDARD - CALIBRATEVOLUME-
LEFT | CENTER | RIGHT | |
0 DB | 0 DB | 0 | DB |
L SIDE | SUB1 | R SIDE | |
0 DB | 0 DB | 0 | DB |
L REAR | SUB 2 | R REAR | |
0 DB | 0 DB | 0 | DB |
Notes
Whenusing an external noise generatorfor volumeconfiguration,soundwill outputsimul- taneouslyfrom all speakersin the system. Adjustmentscan be madeto any speakerin the systehn with the results immediately apparentto the balanceof the wholesystem.
Anyspeakernot configured in the speaker system setup menuwill display N/'A (Not available)for the dBspecification.
®
Page20 of 32