Black & Decker instruction manual 479970-00 LP1000 9/14/05 100 PM

Page 3

479970-00 LP1000 9/14/05 1:00 PM Page 3

your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

g. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust related hazards.

h. Maintain Appliance With Care - Keep cutting edge sharp and clean for best performance and to reduce the risk of injury. Follow instructions for lubricating and changing accessories. Inspect appliance cord periodically, and if damaged, have it repaired by an authorized service facility. Inspect extension cords periodically and replace if damaged. Keep handles dry, clean, and free from oil and grease.

i. Grip Saw Firmly - Hold the chain saw firmly with both hands when the motor is running. Use a firm grip with thumbs and fingers encircling the chain saw handles.

j. Power Supply - Connect chain saw to correct voltage, that is, be sure that the voltage supplied is the same as that specified on the nameplate of the tool.

4. Power tool use and care

a. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

b. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

c. Disconnect the plug from the power source when not in use, before servicing, before making any adjustments, changing accessories and attachments such as saw chain and guard or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

d. When not in use, appliances should be stored indoors in a

dry, and high or locked-up place, out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

e. Check Damaged Parts - Before further use of the appliance, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other condition that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless indicated elsewhere in this manual.

f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

h. Do not operate a chain saw that is damaged, improperly adjusted, or is not completely and securely assembled. Be sure that the saw chain stops moving when the trigger is released.

i. Use extreme caution when cutting small size brush and saplings because the slender material may catch the saw chain and be whipped toward you or pull you off balance.

j. Carry the chain saw by the front handle with the saw stopped, finger off the switch, the guide bar and saw chain to the rear. k. Maintain Chain Saw With Care - Inspect chain saw cords periodically and if damaged, have repaired by authorized service facility. Keep cord clear of the chain and operator at all

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents 0 0 5 4 4 6 9 8 Intended use General Safety Rules479970-00 LP1000 9/14/05 100 PM Distance is at risk from being struck by the falling branch Additional safety instructions for the AlligatorTM LopperKickback Safety Features Extension Cord Polarized PlugsDouble Insulation Chain SAW Names and Terms 479970-00 LP1000 14/05 100 PM Overview ContentsAssembling the chain bar and chain figs. C&D Checking and adjusting the chain tension fig. aReplacing the chain and chain bar Removing the saw chain & chain bar figs. a & BOperation Full Two-Year Home Use Warranty Troubleshooting Section Mode D’EMPLOI Règles de sécurité générales Utilisation prévueEncercler les poignées avec les pouces et doigts 479970-00 LP1000 9/14/05 100 PM Directives de sécurité concernant l’effet de rebond Double isolation RallongeTerminologie ET Nomenclature Relatives À L’ÉBRANCHEUR Fiches polariséesContenu Aperçu généralRéglage de la tension de la chaîne fig. a Remplacement de la chaîne et du guide chaîne Enlever la chaîne et le guide chaîne fig. a & BAssemblage de la chaîne et du guide chaîne fig. C & D Allumer et éteindre l’outil fig. G FonctionnementRallonge Fig. E Lubrification Fig. FInformation sur les réparations AccessoiresSection de dépannage Problème Cause possible Solution possibleManual DE Instrucciones Normas generales de seguridad Uso previstoLimpios y libres de aceite y grasas 479970-00 LP1000 9/14/05 100 PM Características de seguridad durante el retroceso Cable prolongador Enchufes polarizados Doble aislamientoContenido Descripción generalPreparación de la Podadora AlligatorTM para su utilización Ajuste de tensión de la cadena Figura a Verificación y ajuste de la tensión de la cadena Figura aReemplazo de la cadena y de la barra de la cadena Operación Cable prolongador Figura ELubricación Figura F Mantenimiento Encendido y apagado Figura GEncendido Recorte de ramasAlmacenamiento AccesoriosInformación de servicio TransporteProblema Causa posible Solución posible Sección de detección de problemasEspecificaciones 479970-00 LP1000 9/14/05 100 PM

479970-00, LP1000 specifications

The Black & Decker 479970-00, LP1000 model is a versatile and innovative power tool that brings convenience and efficiency to various tasks around the home and workplace. This product is designed for both professionals and DIY enthusiasts, showcasing a blend of functionality, reliability, and user-friendly features.

One of the key highlights of the LP1000 is its powerful motor, which delivers impressive performance for a wide range of applications. With robust power output, users can tackle demanding tasks with ease, whether it’s cutting through tough materials, drilling holes, or driving screws. The high-efficiency motor ensures that users experience consistent speeds and torque, making it an ideal choice for heavy-duty projects.

The LP1000 is equipped with an ergonomic design that enhances user comfort during extended use. Its lightweight construction allows for easy maneuverability, reducing fatigue and increasing overall productivity. The soft-grip handle provides an additional layer of comfort, allowing users to maintain a firm hold even during intricate tasks. This focus on user experience is a testament to Black & Decker’s commitment to providing tools that cater to the needs of both seasoned professionals and hobbyists.

Another significant feature of the LP1000 is its advanced safety technology. It includes a built-in safety switch that prevents accidental startups, ensuring that users can operate the tool without worrying about unintended activation. This is particularly important when working in tight spaces or on delicate projects where precision is crucial.

The LP1000 also stands out due to its adaptability. It comes with a variety of interchangeable attachments, allowing users to customize the tool for specific tasks. Whether users need to drill, sand, or cut, this model can be easily transformed to meet their needs, making it a truly multifunctional tool.

Moreover, the LP1000 is designed with durability in mind. Constructed from high-quality materials, it offers resilience against wear and tear, ensuring longevity even in demanding working conditions. This reliability makes it a worthy investment for anyone looking to enhance their toolkit.

In summary, the Black & Decker 479970-00, LP1000 is a powerful, efficient, and user-friendly tool. With its versatile features, safety innovations, and ergonomic design, it stands out as an essential piece of equipment for anyone tackling home improvement projects or professional tasks. Whether you’re a seasoned professional or a novice DIYer, this tool is engineered to enhance your productivity and deliver outstanding results.
Top Page Image Contents