Black & Decker LP1000, 479970-00 instruction manual Full Two-Year Home Use Warranty

Page 12

479970-00 LP1000 9/14/05 1:00 PM Page 12

-Remove branches as shown in Fig H. Starting from branch tip reduce the branch in logical steps cutting off small sections. “When cutting a limb that is under tension be aware of spring back.

-When the tension in the wood fibres are released the spring loaded limb may strike the operator and /or throw the tool out of control”

-Remove the tool from the cut while it is running at full speed.

Maintenance

Your Black & Decker tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.

If the replacement of the supply cord is necessary, this has to be done by the manufacturer or his agent in order to avoid a safety hazard.

WARNING: Before performing any maintenance or cleaning of the tool, unplug the unit from the power supply.

Cleaning

-Regularly remove the chain access cover and remove any debris that has become trapped.

-Regularly clean the ventilation slots with a clean, dry paint brush.

-To clean the tool, use only mild soap and a damp cloth. Never let any liquid get inside the tool and never immerse any part of the tool into liquid.

Oiling

- Regularly oil the oiling points (15) as indicated in figure F.

Transporting

- Always transport the tool with the jaws closed.

Storage

-When the tool will not be used for several months, wipe any metal components with oil.

-Store the tool in a secure and dry location. The storage temperature must always remain in the range of 41°F (+5 °C) to 104°F (+40 °C). Place the product on a level safe location.

IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts.

Accessories

Replacement chain and bar are available from your nearest Black & Decker service center.

Replacement chain catalog number RC600

The use of accessories not recommended in this manual may be hazardous.

Service Information

Whether you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you. To find your local service location, refer to the yellow page directory under "Tools–Electric" or call: 1-800-54-HOW TO (544-6986).

Full Two-Year Home Use Warranty

Black & Decker (U.S.) Inc. warrants this product for two years against any defects in material or workmanship. The defective product will be replaced or repaired at no charge in either of two ways:

The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer). Returns should be made within the time period of the retailer’s policy for exchanges (usually 30 to 90 days after the sale). Proof of purchase may be required. Please check with the retailer for their specific return policy regarding returns that are beyond the time set for exchanges.

The second option is to take or send the product (prepaid) to a Black

&Decker owned or authorized Service Center for repair or replacement at our option. Proof of purchase may be required. Black

&Decker owned and authorized service centers are listed under "Tools–Electric" in the yellow pages of the phone directory.

This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have other rights which vary from state to state. Should you have any questions, contact the manager of your nearest Black & Decker Service Center. This product is not intended for commercial use.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents 0 0 5 4 4 6 9 8 General Safety Rules Intended use479970-00 LP1000 9/14/05 100 PM Additional safety instructions for the AlligatorTM Lopper Distance is at risk from being struck by the falling branchKickback Safety Features Extension Cord Polarized PlugsDouble Insulation Chain SAW Names and Terms 479970-00 LP1000 14/05 100 PM Contents OverviewChecking and adjusting the chain tension fig. a Replacing the chain and chain barRemoving the saw chain & chain bar figs. a & B Assembling the chain bar and chain figs. C&DOperation Full Two-Year Home Use Warranty Troubleshooting Section Mode D’EMPLOI Utilisation prévue Règles de sécurité généralesEncercler les poignées avec les pouces et doigts 479970-00 LP1000 9/14/05 100 PM Directives de sécurité concernant l’effet de rebond Rallonge Double isolationFiches polarisées Terminologie ET Nomenclature Relatives À L’ÉBRANCHEURContenu Aperçu généralRéglage de la tension de la chaîne fig. a Remplacement de la chaîne et du guide chaîne Enlever la chaîne et le guide chaîne fig. a & BAssemblage de la chaîne et du guide chaîne fig. C & D Fonctionnement Rallonge Fig. ELubrification Fig. F Allumer et éteindre l’outil fig. GAccessoires Information sur les réparationsProblème Cause possible Solution possible Section de dépannageManual DE Instrucciones Uso previsto Normas generales de seguridadLimpios y libres de aceite y grasas 479970-00 LP1000 9/14/05 100 PM Características de seguridad durante el retroceso Cable prolongador Doble aislamiento Enchufes polarizadosContenido Descripción generalPreparación de la Podadora AlligatorTM para su utilización Ajuste de tensión de la cadena Figura a Verificación y ajuste de la tensión de la cadena Figura aReemplazo de la cadena y de la barra de la cadena Operación Cable prolongador Figura ELubricación Figura F Encendido y apagado Figura G EncendidoRecorte de ramas MantenimientoAccesorios Información de servicioTransporte AlmacenamientoSección de detección de problemas Problema Causa posible Solución posibleEspecificaciones 479970-00 LP1000 9/14/05 100 PM

479970-00, LP1000 specifications

The Black & Decker 479970-00, LP1000 model is a versatile and innovative power tool that brings convenience and efficiency to various tasks around the home and workplace. This product is designed for both professionals and DIY enthusiasts, showcasing a blend of functionality, reliability, and user-friendly features.

One of the key highlights of the LP1000 is its powerful motor, which delivers impressive performance for a wide range of applications. With robust power output, users can tackle demanding tasks with ease, whether it’s cutting through tough materials, drilling holes, or driving screws. The high-efficiency motor ensures that users experience consistent speeds and torque, making it an ideal choice for heavy-duty projects.

The LP1000 is equipped with an ergonomic design that enhances user comfort during extended use. Its lightweight construction allows for easy maneuverability, reducing fatigue and increasing overall productivity. The soft-grip handle provides an additional layer of comfort, allowing users to maintain a firm hold even during intricate tasks. This focus on user experience is a testament to Black & Decker’s commitment to providing tools that cater to the needs of both seasoned professionals and hobbyists.

Another significant feature of the LP1000 is its advanced safety technology. It includes a built-in safety switch that prevents accidental startups, ensuring that users can operate the tool without worrying about unintended activation. This is particularly important when working in tight spaces or on delicate projects where precision is crucial.

The LP1000 also stands out due to its adaptability. It comes with a variety of interchangeable attachments, allowing users to customize the tool for specific tasks. Whether users need to drill, sand, or cut, this model can be easily transformed to meet their needs, making it a truly multifunctional tool.

Moreover, the LP1000 is designed with durability in mind. Constructed from high-quality materials, it offers resilience against wear and tear, ensuring longevity even in demanding working conditions. This reliability makes it a worthy investment for anyone looking to enhance their toolkit.

In summary, the Black & Decker 479970-00, LP1000 is a powerful, efficient, and user-friendly tool. With its versatile features, safety innovations, and ergonomic design, it stands out as an essential piece of equipment for anyone tackling home improvement projects or professional tasks. Whether you’re a seasoned professional or a novice DIYer, this tool is engineered to enhance your productivity and deliver outstanding results.
Top Page Image Contents