Billy Goat BC2403 Series owner manual Shut Down, Clearing a Clogged Cutting Deck

Page 14

BC2403 Series Brush Cutter Owner’s Manual

Drive Clutch Lever

SHUT DOWN

1.Release drive clutch handle to disengage transaxle.

2.Release blade clutch handle to disengage blade.

3.Pull throttle control all the way back to the STOP position.

4.Place the ON/OFF (I/O) switch in the OFF (O) position.

CLEARING A CLOGGED CUTTING DECK

DISCONNECT spark plug wire before servicing unit.

1.Shut engine off and wait for blade to stop completely.

2.Disconnect spark plug wire.

3.Remove clog from cutting deck.

WEAR durable gloves. Clog may contain sharp materials.

4. Reconnect spark plug wire.

Part No 500360

14

F050208A

Image 14

Contents Billy Goat BC2403 Series Brush Cutter Contents About this ManualSerial Plate Data BC 2403 Series SpecificationsCommon Replacement Parts General Safety Instructions and Symbols F050208A Intended USE Sound DataVibration Data Briggs and Stratton Instruction LabelsEngine Labels Brush Cutter Assembly Drawing Assembly Instructions Disconnect spark plug wire before assembling unitOperation Operator Controls StartingF050208A Cutting Shut Down Clearing a Clogged Cutting DeckHandling and Transporting StorageCleaning MaintenancePeriodic Maintenance Blade Removal and Sharpening Blade Drive Belt Tension Adjustment Blade Clutch Adjustment Blade Drive Belt Removal and Replacement Front Transaxle Drive Clutch Adjustment Transaxle Cable Adjustment Reconnect spark plug wireTransaxle Drive Belt Removal and Replacement Starter Circuit Schematic Diagram Wiring DiagramsStarter Switch Wiring Troubleshooting Problem Possible Cause Corrective ActionEngine Maintenance and Repair Warranty Claim ProcedureMaintenance Record Illustrated Parts List Engine and Engine Base AssemblyDescription BC2403HEB Handlebar Assembly Description QTY Transaxle and Blade Deck Assembly F032608A Blade Drive Spindle Assembly Detail Drawing Description BC2403HEB F050208A