Billy Goat BC2403 Series owner manual Sound Data, Vibration Data, Intended USE

BC2403 Series Brush Cutter Owner’s Manual

SOUND DATA

SOUND LEVEL 93 Dba at Operator’s position

Sound tests were conducted in accordance with 2000/14/EEC and were performed on 2/21/2002 under the conditions listed below.

Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on the unit for the sound power level for your model.

General Conditions:	Sunny
Temperature:	80oF (25oC)
Wind Speed:	2.0 mph (3.2 kph)
Wind Direction:	South
Humidity:	63.5%
Barometric Pressure:	29.98” Hg (761mm Hg)

VIBRATION DATA

VIBRATION LEVEL .5g (4.87 m/s2)

Vibration levels at the operator’s handles were measured in the vertical, lateral and longitudinal directions using calibrated vibration test equipment. Tests were performed on 5/19/1995 under the conditions listed below.

General Conditions:	Sunny
Temperature:	89oF (31.7oC)
Wind Speed:	6.1 mph (9.9 kph)
Wind Direction:	West
Humidity:	49.7%
Barometric Pressure:	29.88” Hg (101.19 kPa)

INTENDED USE

Your BILLY GOAT ® BC Self-Propelled Brush Cutter is designed for cutting overgrown weeds, brush and other growth down to 3½” (8.9 cm) in height. It is not a lawn mower and does not provide the quality cut of a finish cut mower. It is designed for use in rural areas and should not be operated in tight or confined areas.

Part No 500360 6 F050208A