Billy Goat BC2403 Series owner manual Blade Removal and Sharpening

Page 17

BC2403 Series Brush Cutter Owner’s Manual

BLADE REMOVAL AND SHARPENING

READ all safety instructions before servicing unit.

Numbers in parenthesis ( N-N ) refer to figure and item numbers in Illustrated Parts List.

Tools required:

-5/8” socket, 1/2” drive

-torque wrench, 1/2” drive

-jack stands or similar device adequate to support weight of machine.

DISCONNECT spark plug wire before servicing unit.

1.Disconnect spark plug wire.

2.Lift and support front of unit to allow access to underside.

UNIT IS HEAVY. Make sure support is adequate to support weight of machine.

3.Block blade to prevent it from rotating during removal.

4.Remove blade bolt (8-139), lock washer (8-140) and friction washer (8-54).

Blade bolt (8-139) is a standard right-hand thread bolt.

5. Remove blade (8-50) and install replacement blade.

When replacing the blade use BILLY GOAT Industries PN 500210 only.

When sharpening blade make sure to sharpen all cutting edges.

6. Attach new blade with bolt (8-139), lock washer (8-140) and friction washer (8-54 removed earlier.

Inspect fasteners for wear and replace if necessary.

7.Torque blade bolt to 55-60 ft-lbs.

8.Reconnect spark plug wire.

Part No 500360

17

F050208A

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Billy Goat BC2403 Series Brush Cutter About this Manual ContentsSerial Plate Data BC 2403 Series SpecificationsCommon Replacement Parts General Safety Instructions and Symbols F050208A Intended USE Sound DataVibration Data Briggs and Stratton Instruction LabelsEngine Labels Brush Cutter Assembly Drawing Disconnect spark plug wire before assembling unit Assembly InstructionsOperation Starting Operator ControlsF050208A Cutting Clearing a Clogged Cutting Deck Shut DownStorage Handling and TransportingCleaning MaintenancePeriodic Maintenance Blade Removal and Sharpening Blade Drive Belt Tension Adjustment Blade Clutch Adjustment Blade Drive Belt Removal and Replacement Front Transaxle Cable Adjustment Reconnect spark plug wire Transaxle Drive Clutch AdjustmentTransaxle Drive Belt Removal and Replacement Starter Circuit Schematic Diagram Wiring DiagramsStarter Switch Wiring Problem Possible Cause Corrective Action TroubleshootingWarranty Claim Procedure Engine Maintenance and RepairMaintenance Record Engine and Engine Base Assembly Illustrated Parts ListDescription BC2403HEB Handlebar Assembly Description QTY Transaxle and Blade Deck Assembly F032608A Blade Drive Spindle Assembly Detail Drawing Description BC2403HEB F050208A
Top Page Image Contents