APC 15000 RAID manual Check to ensure that the LUN Zoning chart is empty Figure, To add a user

Controller Installation

2.Check to ensure that the LUN Zoning chart is empty (Figure 2–11).

15000 [1]: zoning		LUN Zoning
Port	World Wide Name	External LUN, Internal LUN

-----------------------------------------------------------------------------

121000001FF040004

222000001FF040004

323000001FF040004

424000001FF040004

Figure 2–11LUN Zoning Screen

To add a user:

1.Type: user audit=on<Enter> The controller reports which users are connected.

2.Type: user add<Enter>.

3.Specify a new Host User’s world wide name, enter s.

4.Specify a 64-bit world wide name or GUID, taken from the list of available anonymous users.

5.Enter an alias name for the user. The name may contain up to 12 characters. Type in a name and

press <Enter>.

6.Host users can have their port access zoned. Enter y to specify host port zoning.

7.For Unit 1, enter each active port on a new line and then exit. For this example, type:

1<Enter>

4<Enter> e<Enter>

8.For Unit 2, enter each active port on a new line and then exit. For this example, type:

1<Enter>

4<Enter> e<Enter>

Host users are limited to accessing specific LUNs, as follows:

•a host user may have its own unique LUN mapping, or

•a host user may use the anonymous LUN mapping.

The anonymous user LUN mapping is handled by the port ZONING command. In either case, the LUN mapping applies on all the ports for which the user has been zoned.

9.Enter y to specify the unique LUN mapping (Table 2–2).

007-5510-002 25