TIER VERIFY Displays a summary of verifications.

To enable Tier Verify (Figure 3–42):

1.At the prompt, type TIER VERIFY=ON <Enter>.

2.The system will ask which tier you wish to verify. Enter the tier number or type a for “All.”

3.The system will ask if you want run the Tier Verify operation continuously or not. Type y to run continuously or N to run just once. The default is N.

Figure 3–42Tier Verify ON Screen

To disable Tier Verify (Figure 3–43):

1.At the prompt, type TIER VERIFY=OFF <Enter>.

2.The system will ask which tier you wish to verify. Enter the tier number or type a for “All.”

Tier Verify will be disabled off after the next iteration has completed.

68

007-5510-002

Page 82
Image 82
APC 15000 RAID manual 42Tier Verify on Screen