Maintenance
Figure 30
1.Spring disc washers
Cleaning
Clean Engine Cooling System
Service Interval: Before each use or daily (May be required more often in dry or dirty conditions.)
CAUTION
Excessive debris around the engine cooling air intake and inside of the pump drive belt compartment and damaged or missing rubber baffles can cause the engine and hydraulic system to overheat which can create a fire hazard.
•Clean all debris from inside of pump drive belt compartment daily.
•Clean debris from radiator screen and core daily.
1.Stop engine, wait for all moving parts to stop, and remove key. Engage parking brake.
2.Clean all debris from inside of pump drive belt compartment.
3.Wipe debris from screen in engine cover.
4.Rotate engine cover forward and wipe debris from radiator core as required.
5.Clean debris from radiator fins with compressed air.
Important: If debris or air can not be blown through the radiator, see Cleaning of the Radiator section.
6.Inspect seals in engine cover and replace if necessary.
Clean Engine and Exhaust System Area
Service Interval: Before each use or daily (May be required more often in dry or dirty conditions.)
46