Exmark Metro manual Riding Attachments, Safety Signs

Page 10

1.5.4Store fuel in a container specifically designed for this purpose. Store the fuel container in a cool, dry place.

1.5.5Keep the mower and fuel container in locked storage to prevent children from playing or tampering with them.

1.5.6Gasoline powered equipment or fuel containers should not be stored in a basement or any enclosed area where open pilot lights or heat appliances are present.

1.5.7Maximum mowing results and safety can only be achieved if the mower is properly maintained and operated correctly.

1.5.8.Check all bolts often to maintain proper tightness.

1.5.9.Keep all guards, shields and all safety devices in place and in safe working condition.

1.5.10Frequently check for worn or damaged components that could create a hazard.

1.5.11All replacement parts must be the same as or equivalent to the parts supplied as original equipment.

1.6RIDING ATTACHMENTS

Use only Exmark riding attachments. The use of other than Exmark riding attachments may create a hazardous condition resulting in injury.

1.7SAFETY SIGNS

1.7.1Keep all safety signs legible. Remove all grease, dirt and debris from safety signs.

1.7.2Safety signs must be replaced if they are missing or illegible.

1.7.3When new components are installed, be sure that current safety signs are affixed to the replaced components.

1.7.4New safety signs may be obtained from your authorized Exmark equipment dealer or distributor or from Exmark Mfg. Co. Inc.

1.7.5Safety signs can be affixed by peeling off the backing to expose the adhesive surface. Apply only to a clean, dry surface. Smooth to remove any air bubbles.

1.7.6Familiarize yourself with the following safety signs and instruction labels. They are critical to the safe operation of your Exmark commercial mower.

PART NO. 303517

LOCATION: Left Side, Rear Surface Engine Deck

PART NO. 403005

LOCATION: Front Corners

of Deck

PART NO. 323550

PART NO. 303293

PART NO. 513746

LOCATION: Upper Handles

LOCATION: Top Right Side

LOCATION: Engine Blower

(Both Sides)

Fuel Tank

Housing Next to

 

- 5 -

Muffler

 

 

Image 10
Contents Page Potential Hazard Exmark Parts PLUS Program Operators Manual Table of Contents Safety Alert Symbol SafetyYour Safety is Involved TrainingPotential Hazard Operation Maintenance and Storage Safety Signs Riding AttachmentsPage Specifications Wheel Drive System DimensionsTires Assembly Instructions Torque RequirementsUpper Handle Height Adjustment Kohler Speed Control Throttle Cable HOOK-UPHP Kawasaki Speed Control Throttle Cable HOOK-UP 15 & 17 HP Kawasaki Speed Control Throttle Cable HOOK-UPFor 12.5 HP Kawasaki, 10.5 HP B&S and Kohler engines For 15 & 17 HP Kawasaki enginesLever and ROD Adjustment This Clearance should be Equal Shifter Lever To TransmissionNeutral Lock Lever Clearance Drive Lever Hardware LocationOperation Instructions ControlsDrive LEVER, Neutral LOCK/PARK Brake Latch Operation PRE-START Be sure ignition switch is in the OFF position Operating Instructions Rotating blades under the mower deck are dangerous Periodic Maintenance Maintenance and AdjustmentsTransporting Service Interval Daily Blade Bolt Installation Service Interval 40 hrs Service Interval 160 hrsLubrication Chart Service Interval Refer to ChartService Interval Spray Lubricant ChartPivot Points Adjustments Caster Height Adjustment Axle NO. of Spacers Number of 1/4 Blade Spacers PositionCutter Deck Belt Adjustment Blade Brake Adjustment 32 & 36 Belt Guide LocationDrive Belt Tension Adjustment Positions Mower Pulling Left or Right Trouble ShootingBlades do not Stop When Disengaged Mower Cuts UnevenlyMower Deck Belt Routing Engine TroubleshootingEngine Troubleshooting Table 36 Mower DeckWiring Diagrams Warranty Page Service Record Date Description of Work DoneFold Along Appropriate Line Industrial Park BOX Exmark MFG. CO. INCBEATRICE, NE ALL Rights Reserved