Exmark Metro manual Be sure ignition switch is in the OFF position

Page 23

Do not add oil to gasoline.

Do not overfill fuel tank. Never fill the fuel tank so that the fuel level rises above a level that is ½” below the bottom of the filler neck to allow for fuel expansion and prevent fuel spillage.

DANGER

POTENTIAL HAZARD

In certain conditions gasoline is extremely flammable and highly explosive.

WHAT CAN HAPPEN

A static charge can ignite gasoline vapors. A fire or explosion from gasoline can burn you, others, and cause property damage.

HOW TO AVOID THE HAZARD

Purchase and store gasoline only in an approved container.

Always place gasoline containers on the ground away from your vehicle before filling.

Do not fill gasoline containers inside a vehicle or on a truck or trailer bed because interior carpets or plastic truck bed liners may insulate the container and slow the loss of any static charge.

When practical, remove gas-powered equipment from the truck or trailer and refuel the equipment with its wheels on the ground.

If this is not possible, then refuel such equipment on a truck or trailer from a portable container, rather than from a gasoline dispenser nozzle.

If a gasoline dispenser nozzle must be used, keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete.

CAUTION

POTENTIAL HAZARD

If the ignition is in the “ON” position there is potential for sparks and engagement of components.

WHAT CAN HAPPEN

Sparks could cause an explosion or moving parts could accidentally engage causing personal injury.

HOW TO AVOID THE HAZARD

Be sure ignition switch is in the “OFF” position.

- 18 -

Image 23
Contents Page Potential Hazard Exmark Parts PLUS Program Operators Manual Table of Contents Training SafetyYour Safety is Involved Safety Alert SymbolPotential Hazard Operation Maintenance and Storage Riding Attachments Safety SignsPage Specifications Tires DimensionsWheel Drive System Torque Requirements Assembly InstructionsKohler Speed Control Throttle Cable HOOK-UP Upper Handle Height Adjustment15 & 17 HP Kawasaki Speed Control Throttle Cable HOOK-UP HP Kawasaki Speed Control Throttle Cable HOOK-UPFor 15 & 17 HP Kawasaki engines For 12.5 HP Kawasaki, 10.5 HP B&S and Kohler enginesThis Clearance should be Equal Shifter Lever To Transmission Lever and ROD AdjustmentDrive Lever Hardware Location Neutral Lock Lever ClearanceControls Operation InstructionsDrive LEVER, Neutral LOCK/PARK Brake Latch Operation PRE-START Be sure ignition switch is in the OFF position Operating Instructions Rotating blades under the mower deck are dangerous Transporting Maintenance and AdjustmentsPeriodic Maintenance Service Interval Daily Blade Bolt Installation Service Interval 160 hrs Service Interval 40 hrsService Interval Refer to Chart Lubrication ChartPivot Points Spray Lubricant ChartService Interval Adjustments Axle NO. of Spacers Number of 1/4 Blade Spacers Position Caster Height AdjustmentCutter Deck Belt Adjustment 32 & 36 Belt Guide Location Blade Brake AdjustmentDrive Belt Tension Adjustment Positions Mower Cuts Unevenly Trouble ShootingBlades do not Stop When Disengaged Mower Pulling Left or Right36 Mower Deck Engine TroubleshootingEngine Troubleshooting Table Mower Deck Belt RoutingWiring Diagrams Warranty Page Date Description of Work Done Service RecordFold Along Appropriate Line BEATRICE, NE ALL Rights Reserved Exmark MFG. CO. INCIndustrial Park BOX