Exmark Metro manual Maintenance and Adjustments, Transporting, Periodic Maintenance

Page 26

4.4 TRANSPORTING

WARNING

POTENTIAL HAZARD

Loading the mower onto a trailer without strong enough or properly supported ramps could be dangerous.

WHAT CAN HAPPEN

The ramps could collapse causing the unit to fall, which could cause injury.

HOW TO AVOID THE HAZARD

Use proper ramps that are secured to the truck or trailer.

Keep feet and legs out from under the unit when loading and unloading.

If necessary, use assistance when loading.

Be sure fuel shut-off valve is closed.

Use a heavy duty trailer to transport the machine. Engage the park brakes and block wheels. After the wheels have been properly blocked, securely fasten the machine to the trailer with straps, chains, cables or ropes. Be sure that the trailer has all necessary lighting and marking as required by law and use a safety chain.

NOTE: When transporting machine, be sure to engage the park brakes. Failure to do so can result in damage and/or premature wear to drive train.

Do not rely solely on the parking brake to hold machine on trailer.

5.MAINTENANCE AND ADJUSTMENTS

5.1 PERIODIC MAINTENANCE

WARNING

POTENTIAL HAZARD

If you leave the key in the ignition switch, someone could start the engine.

WHAT CAN HAPPEN

Accidental starting of the engine could seriously injure you or other bystanders.

HOW TO AVOID THE HAZARD

Remove the key from the ignition switch and pull the wire(s) off the spark plug(s) before you do any maintenance. Also push the wire(s) aside so it does not accidentally contact the spark plug(s).

- 21 -

Image 26
Contents Page Potential Hazard Exmark Parts PLUS Program Operators Manual Table of Contents Safety Alert Symbol SafetyYour Safety is Involved TrainingPotential Hazard Operation Maintenance and Storage Safety Signs Riding AttachmentsPage Specifications Tires DimensionsWheel Drive System Assembly Instructions Torque RequirementsUpper Handle Height Adjustment Kohler Speed Control Throttle Cable HOOK-UPHP Kawasaki Speed Control Throttle Cable HOOK-UP 15 & 17 HP Kawasaki Speed Control Throttle Cable HOOK-UPFor 12.5 HP Kawasaki, 10.5 HP B&S and Kohler engines For 15 & 17 HP Kawasaki enginesLever and ROD Adjustment This Clearance should be Equal Shifter Lever To TransmissionNeutral Lock Lever Clearance Drive Lever Hardware LocationOperation Instructions ControlsDrive LEVER, Neutral LOCK/PARK Brake Latch Operation PRE-START Be sure ignition switch is in the OFF position Operating Instructions Rotating blades under the mower deck are dangerous Transporting Maintenance and AdjustmentsPeriodic Maintenance Service Interval Daily Blade Bolt Installation Service Interval 40 hrs Service Interval 160 hrsLubrication Chart Service Interval Refer to ChartPivot Points Spray Lubricant ChartService Interval Adjustments Caster Height Adjustment Axle NO. of Spacers Number of 1/4 Blade Spacers PositionCutter Deck Belt Adjustment Blade Brake Adjustment 32 & 36 Belt Guide LocationDrive Belt Tension Adjustment Positions Mower Pulling Left or Right Trouble ShootingBlades do not Stop When Disengaged Mower Cuts UnevenlyMower Deck Belt Routing Engine TroubleshootingEngine Troubleshooting Table 36 Mower DeckWiring Diagrams Warranty Page Service Record Date Description of Work DoneFold Along Appropriate Line BEATRICE, NE ALL Rights Reserved Exmark MFG. CO. INCIndustrial Park BOX