Exmark Metro manual Potential Hazard

Page 7

WARNING

POTENTIAL HAZARD

Engine exhaust contains carbon monoxide, which is an odorless deadly poison.

WHAT CAN HAPPEN

Carbon monoxide can kill you and is also known to the State of California to cause birth defects.

HOW TO AVOID THE HAZARD

Do not run engine indoors or in a small confined area where dangerous carbon monoxide fumes can collect.

DANGER

POTENTIAL HAZARD

In certain conditions gasoline is extremely flammable and highly explosive.

WHAT CAN HAPPEN

A fire or explosion from gasoline can burn you, others, and cause property damage.

HOW TO AVOID THE HAZARD

DO NOT smoke while refueling, and stay away from an open flame or where gasoline fumes may be ignited by spark.

Refuel only in a well ventilated area, or refuel outdoors.

Store gasoline in an approved container and keep it out of the reach of children.

Add fuel before starting the engine. Never remove the cap of the fuel tank or add fuel when engine is running or when the engine is hot.

Never fill the fuel tank so that the gasoline level rises above a level that is 1/2” below the bottom of the filler neck to allow for gasoline expansion and prevent fuel spillage.

If fuel is spilled, DO NOT attempt to start the engine. Move away from the area of the spill and avoid creating any source of ignition until fuel vapors have dissipated.

- 2 -

Image 7
Contents Page Potential Hazard Exmark Parts PLUS Program Operators Manual Table of Contents Training SafetyYour Safety is Involved Safety Alert SymbolPotential Hazard Operation Maintenance and Storage Riding Attachments Safety SignsPage Specifications Wheel Drive System DimensionsTires Torque Requirements Assembly InstructionsKohler Speed Control Throttle Cable HOOK-UP Upper Handle Height Adjustment15 & 17 HP Kawasaki Speed Control Throttle Cable HOOK-UP HP Kawasaki Speed Control Throttle Cable HOOK-UPFor 15 & 17 HP Kawasaki engines For 12.5 HP Kawasaki, 10.5 HP B&S and Kohler enginesThis Clearance should be Equal Shifter Lever To Transmission Lever and ROD AdjustmentDrive Lever Hardware Location Neutral Lock Lever ClearanceControls Operation InstructionsDrive LEVER, Neutral LOCK/PARK Brake Latch Operation PRE-START Be sure ignition switch is in the OFF position Operating Instructions Rotating blades under the mower deck are dangerous Periodic Maintenance Maintenance and AdjustmentsTransporting Service Interval Daily Blade Bolt Installation Service Interval 160 hrs Service Interval 40 hrsService Interval Refer to Chart Lubrication ChartService Interval Spray Lubricant ChartPivot Points Adjustments Axle NO. of Spacers Number of 1/4 Blade Spacers Position Caster Height AdjustmentCutter Deck Belt Adjustment 32 & 36 Belt Guide Location Blade Brake AdjustmentDrive Belt Tension Adjustment Positions Mower Cuts Unevenly Trouble ShootingBlades do not Stop When Disengaged Mower Pulling Left or Right36 Mower Deck Engine TroubleshootingEngine Troubleshooting Table Mower Deck Belt RoutingWiring Diagrams Warranty Page Date Description of Work Done Service RecordFold Along Appropriate Line Industrial Park BOX Exmark MFG. CO. INCBEATRICE, NE ALL Rights Reserved