Hayter Mowers 005E Maintenance & Storage, Stop the engine and disconnect the spark plug lead

Page 10

111-1292 A 20/4/07 1:51 pm Page 1.10

SAFETY PRECAUTIONS

Operation

Do not tilt the mower when starting the engine.

Do not put hands or feet near or under rotating parts.

Never pick up or carry the mower while the engine is running.

Never lift the rear flap while the engine is running.

Never touch the exhaust/exhaust guard or cooling fins when the engine is hot.

Stop the engine and disconnect the spark plug lead:

-Before clearing blockages or unclogging the discharge chute.

-Before cleaning/checking or working on the mower.

-After striking a foreign object. Inspect the mower for damage and ensure necessary repairs are made before re-starting.

-If the mower starts to vibrate abnormally (check immediately).

Stop the engine:

-Whenever you leave the mower.

-Before refuelling.

-Reduce throttle control setting during engine shutdown.

Maintenance & Storage

Keep all nuts, bolts and screws tight to ensure that the equipment is in safe operating condition.

Frequently check fuel lines and fittings for cracks or leaks and replace if necessary.

Never check for a spark when the spark plug is removed. (Use approved tester)

Inspect the exhaust periodically and replace if worn or leaking.

Never crank the engine with the spark plug removed.

Never start the engine with the air-cleaner or air-cleaner cover removed.

Never store the mower with petrol in the tank within an enclosed area where fumes may reach an open flame or spark.

1.10

Image 10
Contents Hayterette Main Features Main Features /SPECIFICATIONSSpecifications 1ST Year 12 months 111-1292 a 20/4/07 151 pm Contents Introduction Warranty Limited WarrantyTraining Safety PrecautionsSafety Alert Symbol PreparationOperation Maintenance & Storage Stop the engine and disconnect the spark plug leadSafety Symbols Control SymbolsHandlebar Delivery ChecklistAssembling the Mower Engine Start GripOil Type Before Starting the MowerPrevent Engine Damage Check Oil LevelStarting Step Operating the MowerControls StepStopping TravelTurning SlopesHeight of Cut Before MowingCutterblade Operation Non-Grassed AreasLawn Care Calendar October AugustSeptember NovemberDaily Maintenance ScheduleFirst 5Hrs 25Hrs or Every SeasonCarburettor Adjustments Mower MaintenanceThrottle Cable Adjustment EngineOil Service Air Cleaner ServiceSpark Plug Service Keeping Engine CleanControl Cables Deck HousingSecuring Nuts & Bolts LubricationCutterblade Assembly Cutterblade RemovalStorage Trouble Shooting Problem Possible Fault RemedyTrouble Shooting Declaration of Conformity EC Declaration of ConformityParts List Screw Taptite UNC 3/8 x 1 1/4 1C005D02A 111-1292 a 20/4/07 151 pm 111-1292 a 20/4/07 151 pm 111-1292 a 20/4/07 151 pm Customer Information