Hayter Mowers 005E manual Maintenance Schedule, First 5Hrs, Daily, 25Hrs or Every Season

Page 20

111-1292 A 20/4/07 1:51 pm Page 1.20

MAINTENANCE SCHEDULE

To prevent accidents stop the engine disconnect the spark plug lead before attempting to carry out maintenance procedures on the mower.

Follow the hourly or calendar intervals, whichever occurs first. More frequent service will be required if working for prolonged periods under dusty, dry conditions, or when airborne debris is present or after extensive operation cutting tall, dry grass.

First 5Hrs

After the very first five hours change the engine oil

Daily

Check the oil level

Remove grass debris from around the engine, exhaust/exhaust guard, air ways in the top cowl and underside of the deck housing.

Check the condition of guards and safety devices.

Check condition of cutterblades.

25Hrs or Every Season

Change the engine oil if continuously operating under heavy load or high ambient temperature.

Service the air cleaner.

Lubricate wheels, pivot points and linkages and grease the inner con- trol cables at point of entry and exit from their outer casing.

Sharpen the cutterblades.

50Hrs or Every Season

Change the engine oil.

1.20

Image 20
Contents Hayterette Specifications Main Features /SPECIFICATIONSMain Features 1ST Year 12 months 111-1292 a 20/4/07 151 pm Contents Introduction Warranty Limited WarrantySafety Precautions Safety Alert SymbolTraining PreparationOperation Maintenance & Storage Stop the engine and disconnect the spark plug leadSafety Symbols Control SymbolsDelivery Checklist Assembling the MowerHandlebar Engine Start GripBefore Starting the Mower Prevent Engine DamageOil Type Check Oil LevelOperating the Mower ControlsStarting Step StepTravel TurningStopping SlopesHeight of Cut Before MowingCutterblade Operation Non-Grassed AreasLawn Care Calendar August SeptemberOctober NovemberMaintenance Schedule First 5HrsDaily 25Hrs or Every SeasonMower Maintenance Throttle Cable AdjustmentCarburettor Adjustments EngineOil Service Air Cleaner ServiceSpark Plug Service Keeping Engine CleanDeck Housing Securing Nuts & BoltsControl Cables LubricationCutterblade Assembly Cutterblade RemovalStorage Trouble Shooting Problem Possible Fault RemedyTrouble Shooting Declaration of Conformity EC Declaration of ConformityParts List Screw Taptite UNC 3/8 x 1 1/4 1C005D02A 111-1292 a 20/4/07 151 pm 111-1292 a 20/4/07 151 pm 111-1292 a 20/4/07 151 pm Customer Information