Hayter Mowers 005E manual Spark Plug Service, Keeping Engine Clean

Page 23

111-1292 A 20/4/07 1:51 pm Page 1.23

MOWER MAINTENANCE

Spark Plug Service

Use only Briggs & Stratton spark tester (1) to check for a spark as

 

shown in the diagram.

 

Replace the spark plug every 100 hours or every season, whichever

1

occurs first. A spark plug wrench is available from any authorised

 

Briggs & Stratton service dealer.

 

Check the spark plug gap with a feeler gauge and set at 0.76mm.

Keeping Engine Clean

Remove all grass and debris from the engine including the exhaust/exhaust guard, the air ways in the top cowl and the surround- ing deck areas on a daily basis after use. Never spray the engine with water during cleaning. Water can contaminate the fuel. Always clean with a brush or compressed air.

Grass and debris may clog the engine’s air cooling system especially after prolonged operation while cutting tall, dry grass. The internal cool- ing fins and surfaces may require cleaning to prevent overheating and engine damage. We recommended that this service be carried out by an authorised Briggs and Stratton dealer.

1.23

Image 23
Contents Hayterette Specifications Main Features /SPECIFICATIONSMain Features 1ST Year 12 months 111-1292 a 20/4/07 151 pm Contents Introduction Limited Warranty WarrantyPreparation Safety PrecautionsSafety Alert Symbol TrainingOperation Stop the engine and disconnect the spark plug lead Maintenance & StorageControl Symbols Safety SymbolsEngine Start Grip Delivery ChecklistAssembling the Mower HandlebarCheck Oil Level Before Starting the MowerPrevent Engine Damage Oil TypeStep Operating the MowerControls Starting StepSlopes TravelTurning StoppingBefore Mowing Height of CutNon-Grassed Areas Cutterblade OperationLawn Care Calendar November AugustSeptember October25Hrs or Every Season Maintenance ScheduleFirst 5Hrs DailyEngine Mower MaintenanceThrottle Cable Adjustment Carburettor AdjustmentsAir Cleaner Service Oil ServiceKeeping Engine Clean Spark Plug ServiceLubrication Deck HousingSecuring Nuts & Bolts Control CablesCutterblade Removal Cutterblade AssemblyStorage Problem Possible Fault Remedy Trouble ShootingTrouble Shooting EC Declaration of Conformity Declaration of ConformityParts List Screw Taptite UNC 3/8 x 1 1/4 1C005D02A 111-1292 a 20/4/07 151 pm 111-1292 a 20/4/07 151 pm 111-1292 a 20/4/07 151 pm Customer Information