Hayter Mowers 005E manual Oil Service, Air Cleaner Service

Page 22

111-1292 A 20/4/07 1:51 pm Page 1.22

MOWER MAINTENANCE

Oil Service

Check the oil level daily before starting the engine and ensure that the correct oil level is maintained. Refer to-‘Before Starting the Mower’ for oil checking and filling instructions.

Change the engine oil after the first 5 hours of operation and thereafter according to the ‘Maintenance Schedule’:-

1.Drain fuel by running the engine until the fuel tank is empty.

2.Remove the spark plug lead.

3.Allow the engine to cool.

4.Drain the oil while the engine is warm.(Not hot)

5.Tip the mower over on to its left hand side thus ensuring that the air cleaner is kept uppermost to prevent engine damage.

6.Remove the oil filler dipstick and drain the oil into a suitable container.

7.Refill with new oil of the recommended SAE viscosity grade. (Refer to-‘Before Starting the Mower’)

Air Cleaner Service

3

1

To service the air cleaner, loosen screw (1) and remove cover (2).

Remove cartridge (3) and clean by tapping gently on a flat surface. If very dirty, replace.

4

2

-Do not use petroleum solvents.

-Do not use pressurised air.

-Do not oil the cartridge.

After servicing, install the cartridge into the cover. Insert the tabs on the bottom of the cover into the slots in the bottom of the base (4). Tilt the cover upwards and securely tighten the screw to the base.

1.22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Hayterette Main Features Main Features /SPECIFICATIONSSpecifications 1ST Year 12 months 111-1292 a 20/4/07 151 pm Contents Introduction Warranty Limited WarrantyTraining Safety PrecautionsSafety Alert Symbol PreparationOperation Maintenance & Storage Stop the engine and disconnect the spark plug leadSafety Symbols Control SymbolsHandlebar Delivery ChecklistAssembling the Mower Engine Start GripOil Type Before Starting the MowerPrevent Engine Damage Check Oil LevelStarting Step Operating the MowerControls StepStopping TravelTurning SlopesHeight of Cut Before MowingCutterblade Operation Non-Grassed AreasLawn Care Calendar October AugustSeptember NovemberDaily Maintenance ScheduleFirst 5Hrs 25Hrs or Every SeasonCarburettor Adjustments Mower MaintenanceThrottle Cable Adjustment EngineOil Service Air Cleaner ServiceSpark Plug Service Keeping Engine CleanControl Cables Deck HousingSecuring Nuts & Bolts LubricationCutterblade Assembly Cutterblade RemovalStorage Trouble Shooting Problem Possible Fault RemedyTrouble Shooting Declaration of Conformity EC Declaration of ConformityParts List Screw Taptite UNC 3/8 x 1 1/4 1C005D02A 111-1292 a 20/4/07 151 pm 111-1292 a 20/4/07 151 pm 111-1292 a 20/4/07 151 pm Customer Information
Top Page Image Contents