Hayter Mowers 005E manual Operation

Page 9

111-1292 A 20/4/07 1:51 pm Page 1.9

SAFETY PRECAUTIONS

Preparation

-Always use fresh fuel. Stale fuel can block the carburettor and cause leakage.

-Replace fuel tank and oil tank caps securely.

-Replace faulty silencer.

A damaged cutterblade or loose fixing bolt are major hazards. Before use, always visually inspect the cutting mechanism to ensure that it is in good condition. A damaged cutterblade must be replaced immedi- ately with a genuine Hayter replacement part

Operation

Do not operate the engine in a confined space where exhaust fumes (carbon monoxide) can collect. Refuel outdoors only and do not smoke while refuelling.

Always pull the starter cord slowly until resistance is felt. Then pull the cord rapidly to avoid kickback and prevent hand or arm injury.

Mow only in daylight or good artificial light.

Avoid using the mower on wet grass, where feasible.

Always be sure of your footing on slopes.

Walk, never run.

Mow across the face of slopes, never up and down.

Exercise extreme caution when changing direction on slopes.

Do not mow excessively steep slopes of more than 20 degrees.

Use extreme caution when reversing or pulling the mower towards you.

Stop the engine before moving the mower across areas other than grass.

Never operate the mower unless the guards are securely in position and in good condition.

Do not change the engine governor settings or overspeed the engine.

Start the engine carefully, with feet well away from the cutterblade.

1.9

Image 9
Contents Hayterette Main Features /SPECIFICATIONS Main FeaturesSpecifications 1ST Year 12 months 111-1292 a 20/4/07 151 pm Contents Introduction Limited Warranty WarrantySafety Alert Symbol Safety PrecautionsTraining PreparationOperation Stop the engine and disconnect the spark plug lead Maintenance & StorageControl Symbols Safety SymbolsAssembling the Mower Delivery ChecklistHandlebar Engine Start GripPrevent Engine Damage Before Starting the MowerOil Type Check Oil LevelControls Operating the MowerStarting Step StepTurning TravelStopping SlopesBefore Mowing Height of CutNon-Grassed Areas Cutterblade OperationLawn Care Calendar September AugustOctober NovemberFirst 5Hrs Maintenance ScheduleDaily 25Hrs or Every SeasonThrottle Cable Adjustment Mower MaintenanceCarburettor Adjustments EngineAir Cleaner Service Oil ServiceKeeping Engine Clean Spark Plug ServiceSecuring Nuts & Bolts Deck HousingControl Cables LubricationCutterblade Removal Cutterblade AssemblyStorage Problem Possible Fault Remedy Trouble ShootingTrouble Shooting EC Declaration of Conformity Declaration of ConformityParts List Screw Taptite UNC 3/8 x 1 1/4 1C005D02A 111-1292 a 20/4/07 151 pm 111-1292 a 20/4/07 151 pm 111-1292 a 20/4/07 151 pm Customer Information