Hayter Mowers 005E Before Starting the Mower, Prevent Engine Damage, Oil Type, Check Oil Level

Page 13

111-1292 A 20/4/07 1:51 pm Page 1.13

BEFORE STARTING THE MOWER

Prevent Engine Damage

To prevent engine damage the engine is shipped without oil or petrol. The engine must be filled with the correct grade of oil and petrol before starting the engine.

Oil Type

Always use high quality detergent oil classified “For service SE, SF, SG” SAE 30 oil. Never use additives with recommended oils.

SAE 10W-30 multigrade oil may be used, but this will result in higher engine operating temperatures with consequential high oil consump- tion. It is imperative that the oil level is checked more frequently if this grade of oil is used in order to guard against serious engine damage.

To prolong the life of your engine it is important that the oil is changed after the first 5 hours of use - refer to ‘Maintenance Schedule’.

L I O

Check Oil Level

FULL

Clean around the oil filler cap before removing. With the mower on a level surface, unscrew and remove the oil filler - dipstick. Wipe oil from it with a clean cloth. Screw the oil filler - dipstick back in place, then unscrew and remove it to check the oil level.

The oil level is correct when it is at the full mark on the dipstick.

DO NOT OVERFILL.

0.15 Litres

ADD

Fuel Type

Always use clean, fresh unleaded petrol. Purchase fuel in quantities that can be used within 30 days. Never mix oil with petrol. For added engine protection Briggs & Stratton recommend the use of their fuel additive which is available from an authorised Briggs & Stratton serv- ice dealer.

Fill to base of neck to allow for fuel expansion. Do not overfill the fuel tank.

1.13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Hayterette Main Features Main Features /SPECIFICATIONSSpecifications 1ST Year 12 months 111-1292 a 20/4/07 151 pm Contents Introduction Limited Warranty WarrantySafety Alert Symbol Safety PrecautionsTraining PreparationOperation Stop the engine and disconnect the spark plug lead Maintenance & StorageControl Symbols Safety SymbolsAssembling the Mower Delivery ChecklistHandlebar Engine Start GripPrevent Engine Damage Before Starting the MowerOil Type Check Oil LevelControls Operating the MowerStarting Step StepTurning TravelStopping SlopesBefore Mowing Height of CutNon-Grassed Areas Cutterblade OperationLawn Care Calendar September AugustOctober NovemberFirst 5Hrs Maintenance ScheduleDaily 25Hrs or Every SeasonThrottle Cable Adjustment Mower MaintenanceCarburettor Adjustments EngineAir Cleaner Service Oil ServiceKeeping Engine Clean Spark Plug ServiceSecuring Nuts & Bolts Deck HousingControl Cables LubricationCutterblade Removal Cutterblade AssemblyStorage Problem Possible Fault Remedy Trouble ShootingTrouble Shooting EC Declaration of Conformity Declaration of ConformityParts List Screw Taptite UNC 3/8 x 1 1/4 1C005D02A 111-1292 a 20/4/07 151 pm 111-1292 a 20/4/07 151 pm 111-1292 a 20/4/07 151 pm Customer Information
Top Page Image Contents