Hayter Mowers 005E manual Travel, Turning, Stopping, Slopes

Page 15

111-1292 A 20/4/07 1:51 pm Page 1.15

OPERATING THE MOWER

Travel

Forward travel: Hold and push against the handlebar with both hands to move the mower forwards.

Reverse travel: Hold and pull against the handlebar with both hands to reverse the mower towards you.

Turning

To make a wide turn steer the mower with the handlebar in the direc- tion required.

To make a tight turn apply downward pressure on the handlebar to raise the front wheels just above ground level and steer in the required direction.

To prevent accidents do not raise the front of the mower exces- sively when making a turn. Never raise the rear of the mower when the engine is running.

Stopping

Push the throttle control lever to the ‘slow’ position and release the engine stop lever.

If the engine fails to stop, move the throttle lever to the ‘slow’ posi- tion and disconnect the spark plug lead.

STOP

Slopes

To prevent engine damage do not use the mower on slopes greater than 20 degrees.

1.15

Image 15
Contents Hayterette Main Features /SPECIFICATIONS Main FeaturesSpecifications 1ST Year 12 months 111-1292 a 20/4/07 151 pm Contents Introduction Limited Warranty WarrantyPreparation Safety PrecautionsSafety Alert Symbol TrainingOperation Stop the engine and disconnect the spark plug lead Maintenance & StorageControl Symbols Safety SymbolsEngine Start Grip Delivery ChecklistAssembling the Mower HandlebarCheck Oil Level Before Starting the MowerPrevent Engine Damage Oil TypeStep Operating the MowerControls Starting StepSlopes TravelTurning StoppingBefore Mowing Height of CutNon-Grassed Areas Cutterblade OperationLawn Care Calendar November AugustSeptember October25Hrs or Every Season Maintenance ScheduleFirst 5Hrs DailyEngine Mower MaintenanceThrottle Cable Adjustment Carburettor AdjustmentsAir Cleaner Service Oil ServiceKeeping Engine Clean Spark Plug ServiceLubrication Deck HousingSecuring Nuts & Bolts Control CablesCutterblade Removal Cutterblade AssemblyStorage Problem Possible Fault Remedy Trouble ShootingTrouble Shooting EC Declaration of Conformity Declaration of ConformityParts List Screw Taptite UNC 3/8 x 1 1/4 1C005D02A 111-1292 a 20/4/07 151 pm 111-1292 a 20/4/07 151 pm 111-1292 a 20/4/07 151 pm Customer Information