Hayter Mowers 005E Mower Maintenance, Engine, Throttle Cable Adjustment, Carburettor Adjustments

Page 21

111-1292 A 20/4/07 1:51 pm Page 1.21

MOWER MAINTENANCE

50Hrs or Every Season

Clean the engine cooling system. Clean more often under dusty conditions or when airborne debris is present or after prolonged operation whilst cutting tall, dry grass.

Replace the spark plug.

Engine

1.Air Filter

2. Fuel Cap

1

3.Start Grip

4.Oil Cap/ Dipstick

5.Exhaust Guard

6.Spark Plug / Lead

3

2

4

HA
41	RR
	IER

6 5

Throttle Cable Adjustment

Loosen casing clamp screw (1) and move throttle control to choke
position and then push governor lever (2) as far as possible towards the
screw (1), whilst ensuring throttle lever does not move. Tighten casing	1
clamp screw.	2

Carburettor Adjustments

Should only be made by an authorised Briggs & Stratton dealer. Under no circumstances should the engine be adjusted to run at a speed in excess of that shown on the Declaration of Conformity.

1.21

Image 21

Contents Hayterette Main Features /SPECIFICATIONS Main FeaturesSpecifications 1ST Year 12 months 111-1292 a 20/4/07 151 pm Contents Introduction Limited Warranty WarrantySafety Alert Symbol Safety PrecautionsTraining PreparationOperation Stop the engine and disconnect the spark plug lead Maintenance & StorageControl Symbols Safety SymbolsAssembling the Mower Delivery ChecklistHandlebar Engine Start GripPrevent Engine Damage Before Starting the MowerOil Type Check Oil LevelControls Operating the MowerStarting Step StepTurning TravelStopping SlopesBefore Mowing Height of CutNon-Grassed Areas Cutterblade OperationLawn Care Calendar September AugustOctober NovemberFirst 5Hrs Maintenance ScheduleDaily 25Hrs or Every SeasonThrottle Cable Adjustment Mower MaintenanceCarburettor Adjustments EngineAir Cleaner Service Oil ServiceKeeping Engine Clean Spark Plug ServiceSecuring Nuts & Bolts Deck HousingControl Cables LubricationCutterblade Removal Cutterblade AssemblyStorage Problem Possible Fault Remedy Trouble ShootingTrouble Shooting EC Declaration of Conformity Declaration of ConformityParts List Screw Taptite UNC 3/8 x 1 1/4 1C005D02A 111-1292 a 20/4/07 151 pm 111-1292 a 20/4/07 151 pm 111-1292 a 20/4/07 151 pm Customer Information