Husqvarna EZ4824TF BF, 966659502 warranty Belts, Deck Belt Removal

Page 39

MAINTENANCE

V-belts

Check every 100 hours of operation. Check for severe cracking and large nicks.

NOTE: The belt will show some small cracks in normal operation.

The belts are not adjustable. Replace belts if they begin to slip from wear.

Deck Belt Removal

1.Park on a level surface. Apply parking brake.

2.Lower the deck into the lowest cutting position.

3.Remove bolts from belt shields and remove shields.

4.Remove any dirt or grass that may have accumulated around the cutter housings and entire deck surface.

5.Remove tension on the belt by moving the idler arm.

6.Carefully slip belt up over the top of the cutter housing pulleys and remove belt. Rolling belt over the pulleys may damage the belt.

8058-088

Remove belt shields

Deck Belt Installation

 

 

NOTE: For ease in installing the deck belt, refer to

 

 

the routing decal on the top of the deck.

 

1.

Wrap the deck belt around the electric clutch

 

 

pulley that is located on the engine shaft.

 

2.

Route the belt forward and up onto the deck.

 

3.

Place belt around spring loaded idler pulley.

 

4.

Wrap the belt around the stationary idler pulley

 

 

and around the mandrel housings.

 

5.

Push inward on the idler arm and carefully route

 

 

belt over stationary idler pulley. Once belt is

 

 

properly routed, slowly release idler arm to tension

 

 

belt.

 

6.

Double check belt routing to make sure it matches

 

 

the routing decal, and the belt does not have any

8011-764

twist. Correct as needed.

Belt routing

7.Replace belt shields on both mandrel housings and secure with fasteners.

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Operator Manual All rights reserved Contents Page Introduction Manufacturing Number Good ServiceXxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxx Symbols and DecalsRemove key before Performing any Safety Instructions SafetyNever take passengers Slope Operation Personal Safety EquipmentBe extra cautious when driving on slopes Safe Handling of Gasoline General Maintenance Risk of sparking Spark Arrestor TransportControl Locations ControlsSteering Control Levers Blade Switch Parking BrakeThrottle Control Ignition Switch Choke ControlFuses Fuel Tank Always raise the deck to the highest position for transport Cutting Height AdjusterSeat Adjustment Lever Fuel Shut Off ValveHour Meter Tracking KnobBypass Linkages Operation TrainingSteering Before Starting Starting the Engine Move the throttle to the middle position Press in and turn the ignition key to the start position Weak Battery Jumper CablesTo remove cables, reverse order Running Operating On Hills Mowing Tips Stopping the Engine Moving Machine by Hand Daily Least Hours Once Before After MaintenanceMaintenance Schedule Maintenance intervalDaily Once Hours Each Before After 100 300 MaintenanceReplacing battery BatteryTire Pressures Safety SystemDeck Belt Removal BeltsPump Belt Replacing pump belt Belt installationCutting Blades Blade replacementLeveling deck Adjusting the Mower DeckCaster Wheels HardwareAnti-Scalp Rollers Use protective glasses when cleaning and washing CleaningGeneral LubricationDeck Spindles Wheel and Deck ZerksFront Wheel Mount Front Wheel BearingsTransaxle Transmission Fluid Change Problem Cause TroubleshootingTroubleshooting Service StorageWinter Storage Schematics Standard Hardware Technical DataTorque Specifications AccessoriesTransmission DimensionEZ4824T BF \ EngineUSA requirements Conformity CertificatesAction Date, mtr reading, stamp, sign Delivery ServiceAfter the first 5-8 hours Hour ServiceService Journal At Least Once Each Year Page 115 505927 Rev B 2012-07-30

EZ4824TF BF, 966659502 specifications

The Husqvarna 966659502, commonly known as the EZ4824TF BF, represents an advanced solution for homeowners seeking an efficient riding mower. This powerful machine excels in delivering a reliable performance for mowing medium to large lawns, combining ease of use with robust engineering.

One of the standout features of the EZ4824TF BF is its powerful engine. Equipped with a 24-horsepower Briggs & Stratton engine, this mower offers ample power to tackle tough grass conditions. The engine's innovative design provides high torque and smooth operation, ensuring that mowing tasks are completed quickly and efficiently.

The EZ4824TF BF is designed with a 42-inch cutting deck, allowing for a wide cutting path that reduces the number of passes required to mow an area. This feature saves time and increases productivity. The cutting deck is height adjustable, providing users the flexibility to achieve their desired grass length, accommodating different lawn types and seasonal grass growth.

Another key characteristic of this riding mower is its user-friendly control system. The EZ4824TF BF comes with a foot-operated pedal that makes it easy to adjust speed and maneuver around obstacles, contributing to a more enjoyable mowing experience. This enhances operator control while maintaining comfort during extended use.

In terms of technology, Husqvarna integrates their trademark Zero-Turn technology, enabling the EZ4824TF BF to offer exceptional maneuverability. The dual Hydro-Gear transmissions allow for seamless turning and forward/reverse movement, making it easy to navigate tight corners and landscaping features without damaging your lawn.

Additionally, the mower features a sturdy frame and premium materials designed for durability, providing longevity that homeowners can rely on. A comfortable seat with ergonomic design ensures that operators can enjoy extended mowing sessions without discomfort.

The EZ4824TF BF is also equipped with an easy-access maintenance system, allowing for simplified serviceability. With features such as a removable engine cover and a tool-less air filter, routine maintenance can be performed with ease, extending the life of the machine and keeping it in peak condition.

In summary, the Husqvarna 966659502, EZ4824TF BF combines power, durability, and user-friendly features, making it an ideal choice for homeowners looking for a reliable riding mower. Its advanced technology, comfortable design, and efficient cutting performance make it a standout in the lawn care market, catering to the needs of various lawn sizes and terrains.
Top Page Image Contents