Husqvarna 966659502 Wheel and Deck Zerks, Front Wheel Mount, Front Wheel Bearings, Deck Spindles

Page 46

LUBRICATION

Wheel and Deck Zerks

Use only good quality bearing grease.

Grease from well-known brand names (petrochemical companies, etc.) usually maintains a good quality.

Front Wheel Mount

Lubricate 3-4 strokes with a grease gun on each set of wheel bearings.

Front Wheel Bearings

Lubricate 3-4 strokes with a grease gun on each set of wheel bearings.

IMPORTANT INFORMATION

Use minimal lubrication and remove excess lubricant so that is does not come into contact with belts or belt pulley drive surfaces.

8058-068

Lubricating the front wheels

Deck Spindles

Lower the cutting deck completely.

If a grease gun without rubber hose is used, the foot plate must be removed.

Lubricate with a grease gun, 2-3 strokes per spindle.

8058-142

Deck spindle

8061-035

Deck outer spindle

46

Image 46

Contents Operator Manual All rights reserved Contents Page Introduction Good Service Manufacturing NumberSymbols and Decals Xxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxxRemove key before Performing any Safety Safety InstructionsNever take passengers Personal Safety Equipment Slope OperationBe extra cautious when driving on slopes Safe Handling of Gasoline General Maintenance Risk of sparking Transport Spark ArrestorControls Control LocationsSteering Control Levers Parking Brake Blade SwitchThrottle Control Choke Control Ignition SwitchFuses Fuel Tank Fuel Shut Off Valve Cutting Height AdjusterSeat Adjustment Lever Always raise the deck to the highest position for transportTracking Knob Hour MeterBypass Linkages Training OperationSteering Before Starting Starting the Engine Move the throttle to the middle position Press in and turn the ignition key to the start position Jumper Cables Weak BatteryTo remove cables, reverse order Running Operating On Hills Mowing Tips Stopping the Engine Moving Machine by Hand Maintenance interval MaintenanceMaintenance Schedule Daily Least Hours Once Before AfterMaintenance Daily Once Hours Each Before After 100 300Battery Replacing batterySafety System Tire PressuresBelts Deck Belt RemovalBelt installation Pump Belt Replacing pump beltBlade replacement Cutting BladesAdjusting the Mower Deck Leveling deck Hardware Caster Wheels Anti-Scalp Rollers Cleaning Use protective glasses when cleaning and washingLubrication GeneralFront Wheel Bearings Wheel and Deck ZerksFront Wheel Mount Deck SpindlesTransaxle Transmission Fluid Change Troubleshooting Problem CauseTroubleshooting Storage ServiceWinter Storage Schematics Accessories Technical DataTorque Specifications Standard HardwareEngine DimensionEZ4824T BF \ TransmissionConformity Certificates USA requirementsDelivery Service Action Date, mtr reading, stamp, signHour Service After the first 5-8 hoursService Journal At Least Once Each Year Page 115 505927 Rev B 2012-07-30