Husqvarna EZ4824TF BF, 966659502 warranty Introduction

Page 5

INTRODUCTION

Congratulations

Thank you for purchasing a Husqvarna ride-on mower. This machine is built for superior efficiency to rapidly mow primarily large areas. A control panel easily accessible to the operator and a hydrostatic transmission regulated by steering controls both contribute to the machine’s performance.

This manual is a valuable document. Read the contents carefully before using or servicing the machine. The following of instructions (use, service, maintenance) by all who operate this machine is important for the safety of the operator and others. It can also considerably increase the life span of the machine and increase its resale value.

If you sell your machine, be sure to give the operator’s manual to the new owner.

The final chapter of this operator manual provides a Service Journal. Ensure that service and repair work are documented. A well-kept service journal reduces service costs for the maintenance and affects the machine’s resale value. Please contact your dealer for more information. Take the operator’s manual along when the machine is taken to your dealer for service.

General

In this operator’s manual, left and right, backward and forward are used in relation to the machine’s normal driving direction.

Continuous dedication to improve our products require that specifications and design are subject to change without notice.

Driving and Transport on Public Roads

Check applicable road traffic regulations before transporting on public roads. If the machine is transported, you must always use approved fastening equipment and ensure that the machine is well anchored. DO NOT operate this machine on public roadways.

Towing

If machine is equipped with a tow hitch, use extreme caution when towing. Never allow children or others in or on the towed equipment. Make wide turns to avoid jack-knifing. Travel slowly and allow extra distance to stop.

Do not tow on sloped ground. The weight of the towed equipment may cause loss of traction and loss of control.

Follow the manufacturer's recommendation for weight limits for towed equipment. Do not tow near ditches, canals, and other hazards.

Operating

This machine is constructed only for mowing grass on lawns and even ground without obstacles such as stones, tree stumps, etc. The machine can also be used for other tasks when equipped with special accessories provided by the manufacturer. Operating instructions for the accessories are provided with delivery. All other types of uses are incorrect. The manufacturer’s directions concerning operation, maintenance, and repairs must be carefully followed.

Lawn mowers and all power equipment, can be potentially dangerous if used improperly. Safety requires good judgement, careful use in accordance with these instructions and common sense.

The machine must only be operated, maintained, and repaired by persons familiar with the machine’s special characteristics and who are also knowledgeable about the safety instructions. Use only approved repair parts to maintain this machine.

Accident prevention regulations, other general safety regulations, occupational safety rules, and traffic regulations must be followed without fail.

Unauthorized modifications to the design of the machine may absolve the manufacturer from liability for any resulting personal injury or property damage.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Operator Manual All rights reserved Contents Page Introduction Manufacturing Number Good ServiceXxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxx Symbols and DecalsRemove key before Performing any Safety Instructions SafetyNever take passengers Slope Operation Personal Safety EquipmentBe extra cautious when driving on slopes Safe Handling of Gasoline General Maintenance Risk of sparking Spark Arrestor TransportControl Locations ControlsSteering Control Levers Throttle Control Blade SwitchParking Brake Fuses Ignition SwitchChoke Control Fuel Tank Seat Adjustment Lever Cutting Height AdjusterFuel Shut Off Valve Always raise the deck to the highest position for transportBypass Linkages Hour MeterTracking Knob Steering OperationTraining Before Starting Starting the Engine Move the throttle to the middle position Press in and turn the ignition key to the start position To remove cables, reverse order Weak BatteryJumper Cables Running Operating On Hills Mowing Tips Stopping the Engine Moving Machine by Hand Maintenance Schedule MaintenanceMaintenance interval Daily Least Hours Once Before AfterDaily Once Hours Each Before After 100 300 MaintenanceReplacing battery BatteryTire Pressures Safety SystemDeck Belt Removal BeltsPump Belt Replacing pump belt Belt installationCutting Blades Blade replacementLeveling deck Adjusting the Mower DeckAnti-Scalp Rollers Caster WheelsHardware Use protective glasses when cleaning and washing CleaningGeneral LubricationFront Wheel Mount Wheel and Deck ZerksFront Wheel Bearings Deck SpindlesTransaxle Transmission Fluid Change Problem Cause TroubleshootingTroubleshooting Winter Storage ServiceStorage Schematics Torque Specifications Technical DataAccessories Standard HardwareEZ4824T BF \ DimensionEngine TransmissionUSA requirements Conformity CertificatesAction Date, mtr reading, stamp, sign Delivery ServiceAfter the first 5-8 hours Hour ServiceService Journal At Least Once Each Year Page 115 505927 Rev B 2012-07-30

EZ4824TF BF, 966659502 specifications

The Husqvarna 966659502, commonly known as the EZ4824TF BF, represents an advanced solution for homeowners seeking an efficient riding mower. This powerful machine excels in delivering a reliable performance for mowing medium to large lawns, combining ease of use with robust engineering.

One of the standout features of the EZ4824TF BF is its powerful engine. Equipped with a 24-horsepower Briggs & Stratton engine, this mower offers ample power to tackle tough grass conditions. The engine's innovative design provides high torque and smooth operation, ensuring that mowing tasks are completed quickly and efficiently.

The EZ4824TF BF is designed with a 42-inch cutting deck, allowing for a wide cutting path that reduces the number of passes required to mow an area. This feature saves time and increases productivity. The cutting deck is height adjustable, providing users the flexibility to achieve their desired grass length, accommodating different lawn types and seasonal grass growth.

Another key characteristic of this riding mower is its user-friendly control system. The EZ4824TF BF comes with a foot-operated pedal that makes it easy to adjust speed and maneuver around obstacles, contributing to a more enjoyable mowing experience. This enhances operator control while maintaining comfort during extended use.

In terms of technology, Husqvarna integrates their trademark Zero-Turn technology, enabling the EZ4824TF BF to offer exceptional maneuverability. The dual Hydro-Gear transmissions allow for seamless turning and forward/reverse movement, making it easy to navigate tight corners and landscaping features without damaging your lawn.

Additionally, the mower features a sturdy frame and premium materials designed for durability, providing longevity that homeowners can rely on. A comfortable seat with ergonomic design ensures that operators can enjoy extended mowing sessions without discomfort.

The EZ4824TF BF is also equipped with an easy-access maintenance system, allowing for simplified serviceability. With features such as a removable engine cover and a tool-less air filter, routine maintenance can be performed with ease, extending the life of the machine and keeping it in peak condition.

In summary, the Husqvarna 966659502, EZ4824TF BF combines power, durability, and user-friendly features, making it an ideal choice for homeowners looking for a reliable riding mower. Its advanced technology, comfortable design, and efficient cutting performance make it a standout in the lawn care market, catering to the needs of various lawn sizes and terrains.
Top Page Image Contents