Husqvarna EZ4824TF BF, 966659502 warranty Battery, Replacing battery

Page 37

MAINTENANCE

Battery

The mower is equipped with a maintenance free battery and does not need servicing. However, periodic charging of the battery with an automotive type battery charger will extend its life.

Keep battery and terminals clean.

Keep battery bolts tight.

See chart for charging times

CAUTION!

Always wear eye protection when around batteries.

Cleaning battery and terminals

Corrosion and dirt on the battery and terminals can cause the battery to lose power.

1.Remove terminal covers.

2.Disconnect BLACK battery cable first, then the RED battery cable and remove the battery from the machine.

3.Rinse the battery with plain water and dry.

4.Clean terminals and battery cable ends with wire brush until shiny.

5.Coat terminals with grease or petroleum jelly

6.Reinstall battery.

Replacing battery

1.Lift seat and rotate forward.

2.Using two ½" wrenches disconnect BLACK battery cable then RED battery cable.

3.Position deck to lowest setting.

4.From the underside of the frame, remove the nuts that secure the battery hold-down.

5.Carefully remove the battery from the mower.

6.Install new battery with terminals in the same position as the old battery.

7.Reinstall battery hold-down and secure with nuts removed in Step 4.

8.Reconnect RED battery cable to positive (+) battery terminal with hex bolt and hex nut.

9.Connect BLACK grounding cable to negative (-) battery terminal with remaining hex bolt and nut

10.Replace terminal boot cover.

11.Lower seat.

STANDARD

STATE

APPROXIMATE BATTERY CHARGING TIME*

 

 

TO FULL CHARGE AT 80OF / 27OC

BATTERY

OF

 

 

 

 

 

Maximum Rate at:

 

 

 

 

 

 

CHARGE

 

 

 

 

 

50 Amps

30 Amps

20 Amps

10 Amps

 

 

 

 

 

 

 

 

12.6V

100%

- FULL CHARGE -

 

 

 

 

 

 

12.4V

75%

20 min.

35 min.

48 min.

90 min.

 

 

 

 

 

 

12.2V

50%

45 min.

75 min.

95 min.

180 min.

 

 

 

 

 

 

12.0V

25%

65 min.

115 min.

145 min.

280 min.

 

 

 

 

 

 

11.8V

0%

85 min.

150 min.

195 min.

370 min.

 

 

 

 

 

 

*Charging time depends on battery capacity,

condition, age, temperature and efficiency of charger

IMPORTANT INFORMATION

Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary.

Always use two wrenches for the terminal screws.

WARNING!

Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc.

Positive terminal must be connected first to prevent sparks from accidental grounding.

8050-109

Remove battery hold-down to replace battery

37

Image 37
Contents Operator Manual All rights reserved Contents Page Introduction Manufacturing Number Good ServiceXxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxx Symbols and DecalsRemove key before Performing any Safety Instructions SafetyNever take passengers Slope Operation Personal Safety EquipmentBe extra cautious when driving on slopes Safe Handling of Gasoline General Maintenance Risk of sparking Spark Arrestor TransportControl Locations ControlsSteering Control Levers Parking Brake Blade SwitchThrottle Control Choke Control Ignition SwitchFuses Fuel Tank Seat Adjustment Lever Cutting Height AdjusterFuel Shut Off Valve Always raise the deck to the highest position for transportTracking Knob Hour MeterBypass Linkages Training OperationSteering Before Starting Starting the Engine Move the throttle to the middle position Press in and turn the ignition key to the start position Jumper Cables Weak BatteryTo remove cables, reverse order Running Operating On Hills Mowing Tips Stopping the Engine Moving Machine by Hand Maintenance Schedule MaintenanceMaintenance interval Daily Least Hours Once Before AfterDaily Once Hours Each Before After 100 300 MaintenanceReplacing battery BatteryTire Pressures Safety SystemDeck Belt Removal BeltsPump Belt Replacing pump belt Belt installationCutting Blades Blade replacementLeveling deck Adjusting the Mower DeckHardware Caster WheelsAnti-Scalp Rollers Use protective glasses when cleaning and washing CleaningGeneral LubricationFront Wheel Mount Wheel and Deck ZerksFront Wheel Bearings Deck SpindlesTransaxle Transmission Fluid Change Problem Cause TroubleshootingTroubleshooting Storage ServiceWinter Storage Schematics Torque Specifications Technical DataAccessories Standard HardwareEZ4824T BF \ DimensionEngine TransmissionUSA requirements Conformity CertificatesAction Date, mtr reading, stamp, sign Delivery ServiceAfter the first 5-8 hours Hour ServiceService Journal At Least Once Each Year Page 115 505927 Rev B 2012-07-30

EZ4824TF BF, 966659502 specifications

The Husqvarna 966659502, commonly known as the EZ4824TF BF, represents an advanced solution for homeowners seeking an efficient riding mower. This powerful machine excels in delivering a reliable performance for mowing medium to large lawns, combining ease of use with robust engineering.

One of the standout features of the EZ4824TF BF is its powerful engine. Equipped with a 24-horsepower Briggs & Stratton engine, this mower offers ample power to tackle tough grass conditions. The engine's innovative design provides high torque and smooth operation, ensuring that mowing tasks are completed quickly and efficiently.

The EZ4824TF BF is designed with a 42-inch cutting deck, allowing for a wide cutting path that reduces the number of passes required to mow an area. This feature saves time and increases productivity. The cutting deck is height adjustable, providing users the flexibility to achieve their desired grass length, accommodating different lawn types and seasonal grass growth.

Another key characteristic of this riding mower is its user-friendly control system. The EZ4824TF BF comes with a foot-operated pedal that makes it easy to adjust speed and maneuver around obstacles, contributing to a more enjoyable mowing experience. This enhances operator control while maintaining comfort during extended use.

In terms of technology, Husqvarna integrates their trademark Zero-Turn technology, enabling the EZ4824TF BF to offer exceptional maneuverability. The dual Hydro-Gear transmissions allow for seamless turning and forward/reverse movement, making it easy to navigate tight corners and landscaping features without damaging your lawn.

Additionally, the mower features a sturdy frame and premium materials designed for durability, providing longevity that homeowners can rely on. A comfortable seat with ergonomic design ensures that operators can enjoy extended mowing sessions without discomfort.

The EZ4824TF BF is also equipped with an easy-access maintenance system, allowing for simplified serviceability. With features such as a removable engine cover and a tool-less air filter, routine maintenance can be performed with ease, extending the life of the machine and keeping it in peak condition.

In summary, the Husqvarna 966659502, EZ4824TF BF combines power, durability, and user-friendly features, making it an ideal choice for homeowners looking for a reliable riding mower. Its advanced technology, comfortable design, and efficient cutting performance make it a standout in the lawn care market, catering to the needs of various lawn sizes and terrains.