Husqvarna 966659502, EZ4824TF BF warranty Pump Belt Replacing pump belt, Belt installation

Page 40

MAINTENANCE

Pump Belt

Replacing pump belt

Park the mower on a level surface. Engage the parking brake.

IMPORTANT INFORMATION

Make sure that the fan blades are not damaged when replacing the pump belt. The fan cooling can be affected and damage to the pump could result.

Belt removal

1.Remove the deck belt (see Deck Belt Removal in this section of the manual).

2.Create slack in the belt by inserting a ½" breaker bar into the square hole on the spring loaded idler. Rotate arm to release belt tension.

3.Remove the belt from the engine pulley and pump pulleys.

Belt installation

1.Wrap the belt around the pump pulleys.

2.Route the belt around the inside of the idler pulley.

3.Wrap the belt around the engine pulley.

4.Release idler arm to retighten tension.

5.Reinstall the deck belt. (see Deck Belt Installation in this section of the manual).

3

4

5

2

1

8058-186

1.Spring loaded idler

2.Fixed idler pulley

3.Electric clutch

4.Pump belt

5.Deck belt

Pump belt removal

40

Image 40

Contents Operator Manual All rights reserved Contents Page Introduction Good Service Manufacturing NumberSymbols and Decals Xxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxxRemove key before Performing any Safety Safety InstructionsNever take passengers Personal Safety Equipment Slope OperationBe extra cautious when driving on slopes Safe Handling of Gasoline General Maintenance Risk of sparking Transport Spark ArrestorControls Control LocationsSteering Control Levers Parking Brake Blade SwitchThrottle Control Choke Control Ignition SwitchFuses Fuel Tank Cutting Height Adjuster Seat Adjustment LeverFuel Shut Off Valve Always raise the deck to the highest position for transportTracking Knob Hour MeterBypass Linkages Training OperationSteering Before Starting Starting the Engine Move the throttle to the middle position Press in and turn the ignition key to the start position Jumper Cables Weak BatteryTo remove cables, reverse order Running Operating On Hills Mowing Tips Stopping the Engine Moving Machine by Hand Maintenance Maintenance ScheduleMaintenance interval Daily Least Hours Once Before AfterMaintenance Daily Once Hours Each Before After 100 300 Battery Replacing batterySafety System Tire PressuresBelts Deck Belt RemovalBelt installation Pump Belt Replacing pump beltBlade replacement Cutting BladesAdjusting the Mower Deck Leveling deckHardware Caster WheelsAnti-Scalp Rollers Cleaning Use protective glasses when cleaning and washingLubrication GeneralWheel and Deck Zerks Front Wheel MountFront Wheel Bearings Deck SpindlesTransaxle Transmission Fluid Change Troubleshooting Problem CauseTroubleshooting Storage ServiceWinter Storage Schematics Technical Data Torque SpecificationsAccessories Standard HardwareDimension EZ4824T BF \Engine TransmissionConformity Certificates USA requirementsDelivery Service Action Date, mtr reading, stamp, signHour Service After the first 5-8 hoursService Journal At Least Once Each Year Page 115 505927 Rev B 2012-07-30