Husqvarna RZ4623/967009801 warranty Troubleshooting

Page 47

TROUBLESHOOTING

Problem

Cause

 

 

 

Engine overheats

Clogged air intake or cooling fins

 

Engine overloaded

 

• Poor ventilation around engine

 

• Defective engine speed regulator

 

• Too little or no oil in the engine

 

• Contamination in the carburetor or fuel line.

 

Fouled spark plugs

 

 

 

Battery not charging

Poor contact of the battery terminal cable connections

 

• Charging lead is disconnected

 

 

 

The machine moves slowly, unevenly, or not at all

Parking brake on

 

• Bypass valve on pump open

 

• Drive belt for the transmission slack or has come off

 

• Air trapped in hydraulic system

 

 

 

Mower deck not engaging

Drive belt for the mower deck has come loose

 

• Contact for the electromagnetic coupling has loosened

 

• Blade switch is faulty or has come loose from cable

 

 

contact

 

Blown fuse

 

 

 

Transaxle leaks oil

Damaged seals, housing, or gaskets

 

• Air trapped in hydraulic system

 

 

 

Uneven mowing results

Different air pressure in tires on the left and right sides.

 

Bent blades

 

• Suspending for the mower deck is uneven

 

Blades are dull

 

• Driving speed too high

 

• Grass is too long

 

• Grass collected under the mower deck

47

Image 47
Contents Operator Manual All rights reserved Contents Page Introduction Manufacturing Number Good ServiceXxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxx Symbols and DecalsRemove key before Performing any General Operation SafetySafety Instructions Never take passengers Slope Operation Personal Safety EquipmentBe extra cautious when driving on slopes Safe Handling of Gasoline General Maintenance With water Spark Arrestor TransportControl Locations ControlsSteering Control Levers Throttle Control Blade SwitchParking Brake Fuses Ignition SwitchChoke Control Fuel Tank Always raise the deck to the highest position for transport Cutting Height AdjusterFuel Shut Off Valve Bypass LinkagesTracking Knob Seat Adjustment LeverSeat should not be adjusted while unit is in motion Hour MeterSteering OperationTraining Before Starting Starting the Engine Move the throttle to the middle position Press in and turn the ignition key to the start position To remove cables, reverse order Weak BatteryJumper Cables Use Running Operating On Hills Mowing Tips Stopping the Engine Moving Machine By Hand Before After MaintenanceMaintenance Schedule Daily Maintenance interval Least Hours Once EachBefore After 100 300 Daily At least Maintenance Once Interval Each HoursReplacing battery BatterySafety System Anti-scalp Rollers Tire PressuresDeck Belt Removal Deck Belt InstallationBelts Cutting Blades Blade replacementLeveling deck Adjusting the Mower DeckCaster Wheels CleaningRemoval and installation of caster wheel Use protective glasses when cleaning and washingGeneral LubricationLubrication Schedule Front Wheel Bearings Wheel and Deck ZerksTransmission Front Wheel MountMaintenance Section TroubleshootingProblem Cause Troubleshooting Winter Storage ServiceStorage Schematics Standard Hardware Technical DataTorque Specifications AccessoriesTransmission Dimensions967009801 EngineUSA requirements Conformity CertificatesDelivery Service Service JournalAfter the First 10 Hours Hour ServicePerform the 25-hour service At Least Once Each Year Service Journal Service Journal Page 115 457827 Rev B 2012-01-16