OPERATION
Before Starting
1.Read the sections on Safety and Controls before starting the machine.
2.Perform the daily maintenance before starting (see Maintenance Schedule in the Maintenance section).
3.Check that there is sufficient fuel in the fuel tank.
4.Adjust the seat to the desired position.
5.Set the deck cutting height by inserting the lift pin into the desired cut height. Resecure the lift pin with the hairpin.
Lengthways adjustment
Secure selected cutting height |
The following conditions must be fulfilled before the engine can be started:
•The blade switch must be pressed downward into the disengaged position.
•The parking brake must be up into the activated position.
•Both steering controls must be in the locked (outer) neutral position.
25