Husqvarna RZ4623/967009801 warranty Running

Page 30

OPERATION

Running

1.Release the parking brake by pushing the top release button in and moving the lever downward. NOTE: The mower is equipped with an operator presence system. When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake will shut off the engine.

2.Move the steering controls inwards, out of the neutral position (N).

8058-187

Parking brake released

3.Push the release button on the cutting height lever and move lever to the pin, release the button.

WARNING!

Make sure that no one is near mower when engaging blade switch.

Make sure the work area is free from objects that could be thrown by the rotating blades.

8058-206

Mower deck lifting lever

4. Move throttle control to full throttle.

5. Engage the mower deck by pulling out the blade switch.

8058-172

Set blade engagement and throttle control

30

Image 30

Contents Operator Manual All rights reserved Contents Page Introduction Good Service Manufacturing NumberSymbols and Decals Xxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxxRemove key before Performing any Safety Safety InstructionsGeneral Operation Never take passengers Personal Safety Equipment Slope OperationBe extra cautious when driving on slopes Safe Handling of Gasoline General Maintenance With water Transport Spark ArrestorControls Control LocationsSteering Control Levers Blade Switch Parking BrakeThrottle Control Ignition Switch Choke ControlFuses Fuel Tank Bypass Linkages Cutting Height AdjusterFuel Shut Off Valve Always raise the deck to the highest position for transportHour Meter Seat Adjustment LeverSeat should not be adjusted while unit is in motion Tracking KnobOperation TrainingSteering Before Starting Starting the Engine Move the throttle to the middle position Press in and turn the ignition key to the start position Weak Battery Jumper Cables UseTo remove cables, reverse order Running Operating On Hills Mowing Tips Stopping the Engine Moving Machine By Hand Daily Maintenance interval Least Hours Once Each MaintenanceMaintenance Schedule Before AfterDaily At least Maintenance Once Interval Each Hours Before After 100 300Battery Replacing batterySafety System Tire Pressures Anti-scalp RollersDeck Belt Installation BeltsDeck Belt Removal Blade replacement Cutting BladesAdjusting the Mower Deck Leveling deckUse protective glasses when cleaning and washing CleaningRemoval and installation of caster wheel Caster WheelsLubrication Lubrication ScheduleGeneral Front Wheel Mount Wheel and Deck ZerksTransmission Front Wheel BearingsTroubleshooting Problem CauseMaintenance Section Troubleshooting Service StorageWinter Storage Schematics Accessories Technical DataTorque Specifications Standard HardwareEngine Dimensions967009801 TransmissionConformity Certificates USA requirementsService Journal Delivery ServiceHour Service After the First 10 HoursPerform the 25-hour service At Least Once Each Year Service Journal Service Journal Page 115 457827 Rev B 2012-01-16