Husqvarna RZ4623/967009801 warranty Safety Instructions, General Operation

Page 9

SAFETY

Safety Instructions

These instructions are for your safety. Read them carefully.

WARNING!

THIS CUTTING MACHINE IS CAPABLE

OF AMPUTATING HANDS AND FEET

AND THROWING OBJECTS. FAILURE

TO OBSERVE THE FOLLOWING

SAFETY INSTRUCTIONS COULD

RESULT IN SERIOUS INJURY OR

DEATH.

General Operation

Read, understand, and follow all instructions on the machine and in the manual before starting.

It is recommended that someone be aware that you are mowing and can provide help in case of injury or accident.

Do not put hands or feet near rotating parts or under the machine. Keep clear of the discharge opening at all times.

Only allow responsible adults, who are familiar with the instructions, to operate the machine.

Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown by the blades.

Be sure the area is clear of bystanders before operating. Stop machine if anyone enters the area.

Never carry passengers. The machine is only intended for use by one person.

Do not mow in reverse unless absolutely necessary. Always look down and behind before and while backing.

Never direct discharged material toward anyone. Avoid discharging material against a wall or obstruction. Material may ricochet back toward the operator. Stop the blades when crossing gravel surfaces.

Do not operate machine without the entire grass catcher, discharge guard, or other safety devices in place and working

Slow down before turning.

Never leave a running machine unattended. Always turn off blades, set parking brake, stop engine, and remove keys before dismounting.

WARNING!

This symbol means that important safety instructions need to be emphasized. It concerns your safety.

8011-512

Read the operator’s manual before starting the machine

8011-513

Clear the area of objects before mowing

9

Image 9
Contents Operator Manual All rights reserved Contents Page Introduction Manufacturing Number Good ServiceXxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxx Symbols and DecalsRemove key before Performing any Safety Safety InstructionsGeneral Operation Never take passengers Slope Operation Personal Safety EquipmentBe extra cautious when driving on slopes Safe Handling of Gasoline General Maintenance With water Spark Arrestor TransportControl Locations ControlsSteering Control Levers Blade Switch Parking BrakeThrottle Control Ignition Switch Choke ControlFuses Fuel Tank Fuel Shut Off Valve Cutting Height AdjusterBypass Linkages Always raise the deck to the highest position for transportSeat should not be adjusted while unit is in motion Seat Adjustment LeverHour Meter Tracking KnobOperation TrainingSteering Before Starting Starting the Engine Move the throttle to the middle position Press in and turn the ignition key to the start position Weak Battery Jumper Cables UseTo remove cables, reverse order Running Operating On Hills Mowing Tips Stopping the Engine Moving Machine By Hand Maintenance Schedule MaintenanceDaily Maintenance interval Least Hours Once Each Before AfterBefore After 100 300 Daily At least Maintenance Once Interval Each HoursReplacing battery BatterySafety System Anti-scalp Rollers Tire PressuresDeck Belt Installation BeltsDeck Belt Removal Cutting Blades Blade replacementLeveling deck Adjusting the Mower DeckRemoval and installation of caster wheel CleaningUse protective glasses when cleaning and washing Caster WheelsLubrication Lubrication ScheduleGeneral Transmission Wheel and Deck ZerksFront Wheel Mount Front Wheel BearingsTroubleshooting Problem CauseMaintenance Section Troubleshooting Service StorageWinter Storage Schematics Torque Specifications Technical DataAccessories Standard Hardware967009801 DimensionsEngine TransmissionUSA requirements Conformity CertificatesDelivery Service Service JournalAfter the First 10 Hours Hour ServicePerform the 25-hour service At Least Once Each Year Service Journal Service Journal Page 115 457827 Rev B 2012-01-16