3. INSTALLATION
•- In the passage, the guide wire must therefore be placed so that the mower has as much space to run in as possible. The distance between the boundary wire and the guide wire must however be at least 30 cm.
If the guide wire has to be installed on a steep slope, it is an advantage to lay the wire at an angle to the slope. This makes it easier for the mower to follow the guide wire on the slope.
Avoid laying the wire at sharp angles. This can make it difficult for the mower to follow the guide wire.
4.Run the guide wire to the spot on the boundary wire where you want to make the connection.
5.Lift out the boundary wire. Cut off the boundary wire using a pair of wire cutters.
Maximum |
distance |
At least 30 cm |
At least 2 m |
135º |
135º |
90º |
30 - English