9. TROUBLE SHOOTING
Message | Cause | Action |
|
|
|
|
|
|
No drive | Automower® has got caught in | Free the mower and rectify the |
| something. | reason for the lack of drive. If it is due |
|
| to wet grass, wait until the lawn has |
|
| dried before using the mower. |
|
|
|
| The working area includes a steep | Maximum guaranteed slope is 25%. |
| slope. | Steeper slopes should be isolated. |
|
| See 3.4 Installation of the boundary |
|
| wire on page 21. |
|
|
|
| The guide wire is not laid at an angle | If the guide wire is laid on a slope, it |
| on a slope. | must be laid at an angle across the |
|
| slope. See 3.6 Installation of the |
|
| guide wire on page 28. |
|
|
|
Charging station | The contact between the charging | Place Automower® in the charging |
blocked | strips and contact strips may be poor | station and check that the charging |
| and Automower® has made a number | strips and contact strips make good |
| of charging attempts. | contact. |
|
|
|
| An object is obstructing Automower®. | Remove the object. |
|
|
|
Stuck in charging | There is an object in the way of | Remove the object. |
station | Automower® preventing it from |
|
| leaving the charging station. |
|
|
|
|
Upside down | Automower® leans too much or has | Turn the mower the right way up. |
| turned over. |
|
|
|
|
Needs manual | Automower® is set in MAN operating | Park the mower in the charging |
charging | mode. | station. This behaviour is normal; |
|
| no action required. |
|
|
|
Next start hh:mm | The timer setting prevents the mower | Change the timer settings. See |
| from operating. | 6.3 Timer (1) on page 43. |
|
|
|
| The rest period is in progress. The | This behaviour is normal and no |
| mower has to be in the charging | action is required. |
| station for at least 8 hours a day. |
|
|
|
|
English - 61