Husqvarna 305 manual Use, Charging a discharged battery

Page 34

4. USE

4. Use

4.1 Charging a discharged battery

When Husqvarna Automower® is new or has been stored for a long period the battery will not be charged and needs to be charged before starting. Charging takes approximately 80 to 100 minutes.

1.Set the main switch to the 1 position.

2. Place Automower® in the charging station. Open the cover and slide the mower in as far as possible to ensure proper contact between the mower and the charging station.

3.The display shows a message that charging is in

progress.

WARNING

Read the safety instructions before you start your Automower®.

WARNING

Keep your hands and feet away from the rotating blades. Never put your hands or feet close to or under the body when the motor is running.

34 - English

Image 34
Contents Husqvarna Automower 305 OPERATOR’S Manual Page Table of Contents Memo Serial number PIN code Dealer Dealer’s telephone numberIntroduction and safety IntroductionSymbols on the product Xxxxxx xxxxx xxxx xxxx xxxxx Symbols in the Operator’s ManualImportant Information Xxxxxx xxxxx xxxx xxxx xxxxx Safety instructions UseMaintenance TransportPresentation What’s what? Capacity FunctionMowing technique Working method Locating the charging station Movement patternSecurity 3 on Carry out the installation in the following steps InstallationPreparations Installation of the charging station Ideal position of the charging station3020-043 Connecting the transformer Installation och anslutning av laddstation Low voltage cable must not be shortened nor extendedCharging the battery Transformer may not be exposed to direct sunlightPlan where to lay the boundary wire Installation of the boundary wireWhat’s what? on Min Boundaries within the working area Secondary areasPassages when mowing SlopesLaying out the boundary wire Installation of the guide wire onLaying the boundary wire in towards the charging station Joining the boundary wireConnecting the boundary wire Installation of the guide wire Installation 2 onPlacement and connection of the guide wire At least 2 m Checking the installation First start-up and calibration Use Memo on page 4 to make a note PIN codeTest docking with the charging station Charging a discharged battery UseUsing the timer ExampleStopping Switching offStarting RestartAdjusting the cutting height Control panel Home Operation selectionMulti-choice buttons AutoMain switch NumbersBrowse between menus Menu functionsMain menu Number seriesTimer Installation Security Menu structureTimer Work periodInstallation Guide widthNarrow Test settings Security Function Low Medium HighAlarm We recommend using the High security level at all timesPIN request Settings Proportion Guide width Garden exampleNever Wide Proportion TimerProportion Never Guide width MediumArea, select Proportion Medium Proportion Medium Guide widthProportion Never Guide width Wide Maintenance After winter storage ServiceWinter storage AutomowerChassis CleaningUnderframe and blade disc WheelsBlades Transport and removalCase of thunderstorms BodyBattery Replacing the battery3020-045 Trouble shooting MessagesTrouble Shooting Trouble Shooting Indicator lamp in the charging station Light Cause ActionSymptom But the blade disc Symptom Cause Action Automower vibrerarAutomower moves Does not rotateFinding breaks in the loop wire Guide Trouble Shooting Trouble Shooting Environmental information Technical dataData Automower EU declaration of conformity EU Declaration of Conformity only applies to EuropePage Original Instructions
Related manuals
Manual 74 pages 31.6 Kb Manual 2 pages 60.87 Kb