Husqvarna 305 manual Battery, Replacing the battery

Page 57

8.MAINTENANCE

4.Remove the screw. Use a straight slot or cross-tip screwdriver.

5. Remove the blade and the screw.

6. Screw on the new blade and the new screw.

8.8 Battery

The battery is maintenance-free, but has a limited life span of 2-4 years.

Battery life is dependent on the length of the season and how many hours per day the Automower® is used. A long season or many hours of use per day means that the battery must be replaced more regularly.

IMPORTANT INFORMATION

Fully charge the battery at the end of the season before winter storage.

Replacing the battery

If the operating times for the mower are shorter than normal between charges, this indicates that the battery is getting old and eventually needs replacing. The battery is ﬁne as long as the mower maintains a well-cut lawn.

IMPORTANT INFORMATION

Use Husqvarna's original battery only. Compatibility with other batteries cannot be guaranteed.

1.Set the main switch to position 0.

2.Turn the mower upside down.

3.Clean around the battery cover.

4.Unscrew the four screws to the battery cover (Torx 20) and remove the battery cover.

3020-044

English - 57

Image 57

Contents Husqvarna Automower 305 OPERATOR’S Manual Page Table of Contents Serial number PIN code Dealer Dealer’s telephone number MemoIntroduction Introduction and safetySymbols on the product Symbols in the Operator’s Manual Xxxxxx xxxxx xxxx xxxx xxxxxImportant Information Xxxxxx xxxxx xxxx xxxx xxxxx Use Safety instructionsTransport MaintenancePresentation What’s what? Function CapacityMowing technique Working method Movement pattern Locating the charging stationSecurity 3 on Installation Carry out the installation in the following stepsPreparations Ideal position of the charging station Installation of the charging station3020-043 Connecting the transformer Low voltage cable must not be shortened nor extended Installation och anslutning av laddstationTransformer may not be exposed to direct sunlight Charging the batteryInstallation of the boundary wire Plan where to lay the boundary wireWhat’s what? on Min Secondary areas Boundaries within the working areaSlopes Passages when mowingInstallation of the guide wire on Laying out the boundary wireJoining the boundary wire Laying the boundary wire in towards the charging stationConnecting the boundary wire Installation 2 on Installation of the guide wirePlacement and connection of the guide wire At least 2 m Checking the installation Use Memo on page 4 to make a note PIN code First start-up and calibrationTest docking with the charging station Use Charging a discharged batteryExample Using the timerStarting Switching offStopping RestartAdjusting the cutting height Control panel Multi-choice buttons Operation selectionHome AutoNumbers Main switchMain menu Menu functionsBrowse between menus Number seriesMenu structure Timer Installation SecurityWork period TimerGuide width InstallationNarrow Test settings Function Low Medium High SecurityWe recommend using the High security level at all times AlarmPIN request Settings Garden example Proportion Guide widthNever Wide Proportion Never TimerProportion Guide width MediumProportion Medium Guide width Area, select Proportion MediumProportion Never Guide width Wide Maintenance Winter storage ServiceAfter winter storage AutomowerUnderframe and blade disc CleaningChassis WheelsCase of thunderstorms Transport and removalBlades BodyReplacing the battery Battery3020-045 Messages Trouble shootingTrouble Shooting Trouble Shooting Light Cause Action Indicator lamp in the charging stationSymptom Automower moves Symptom Cause Action Automower vibrerarBut the blade disc Does not rotateFinding breaks in the loop wire Guide Trouble Shooting Trouble Shooting Technical data Environmental informationData Automower EU Declaration of Conformity only applies to Europe EU declaration of conformityPage Original Instructions

Related manuals

Manual 74 pages 31.6 Kb

Manual 2 pages 60.87 Kb