1.INTRODUCTION AND SAFETY
•Husqvarna AB does not guarantee full compatibility between Automower® and other types of wireless systems such as remote controls, radio transmitters, buried electric animal fencing or similar.
Transport
The original packaging should be used when transporting Automower® over long distances.
To safely move from or within the working area:
1. Press the STOP button to stop the mower. If security is set to the medium or high level (see 6.5 Security (3) on page 47) the PIN code has to be entered. The PIN code has four digits and is chosen when the mower is started for the first time, see 3.8 First
2.Set the main switch to position 0.
3. Carry the mower by the handle at the rear under the mower. Carry the mower with the blade disc away from the body.
IMPORTANT INFORMATION
Do not lift the mower when it is parked in the charging station. This may damage the charging station and/or the mower. Open the cover and instead first pull the mower out of the charging station before lifting it.
Maintenance
WARNING
When the mower is turned upside down the main switch must always be set to the 0 position.
The main switch should be set to the 0 position during all work on the mower’s underframe, such as cleaning or replacing the blades.
• Inspect Automower® each week and replace any damaged or worn parts.
Check especially that the blades and blade disc are not damaged. Replace all blades and screws at the same time if necessary so that the rotating parts are balanced, see 8.7 Blades.
English - 9