Canon 100 HS, IXUS 115 HS Changing Shooting Function Settings, Turning Off the AF Assist Beam, Turning Off the Red-EyeReduction Function

Changing Shooting Function Settings

If you set the mode switch to 4, and the mode to G, you can change the settings in the 4 tab (p. 47).

Before attempting to shoot using a function explained in this section in modes other than G, check if the function is available in those modes (pp. 190 – 197).

Turning Off the AF Assist Beam

The lamp will automatically light to assist focusing in low light conditions when you press the shutter button halfway. You can turn off the lamp.

zChoose [AF-assist Beam], then press the qr buttons to choose [Off].

Turning Off the Red-Eye Reduction Function

The red-eye reduction lamp lights in order to reduce the red-eye effect that occurs when shooting in dark conditions with the flash. You can turn off this function.

zChoose [Flash Settings], then press the m button.

zPress the op buttons to choose [Red- Eye Lamp], then press the qr buttons to choose [Off].

173