Installing ED2250S/P
Installation Precautions
1)Make sure that the installation site can sufficiently support a minimum of four times the net weight of the ED2250S/P Combi Dome Camera and
other accessories.
2)Install in an area where the space above the ceiling board is over 18 cm
(7 in.) high.
3)Use the supplied screws to fasten the camera to the bracket assembly.
4)Keep persons away from the installation area, as there is a risk of falling objects.
Also, move valuables to a safe location before installation.
Separately Sold Products for Installation
Depending on the installation site, it may be convenient to use one of the following products.
1) CEILING MOUNT BRACKET
This bracket is used for installing the SMARTDOME CAMERA in the plenum above the drop ceiling.
2) WALL MOUNT ADAPTOR
This adaptor is used for installing the indoor housing or the outdoor housing for the
Combi Dome Camera on a wall.
3)INDOOR HOUSING
This housing is used for installing the Combi Dome Camera to an indoor wall or a ceiling.
E
4)OUTDOOR HOUSING
This housing is used for installing the Combi Dome Camera to an outdoor wall or a ceiling.