Digital Multiplexer
Chapter 6. Recording
1.Normal record mode
When setting the “REC TYPE” of the setup menu “1.REC OUT SET” to “NOR”.
(1)Frame record
-When setting the “REC TYPE” of the setup menu “1.REC OUT SET” to FRAME.
-The image signal entered from the maximum 16 cameras is output in Frame and recorded on the VCR.
-The recorded output records the only channel that the “REC DUTY” of the “1.REC OUT SET” is set to more than 1.
1/30sec(NTSC), 1/25(PAL)
(2)Field record
-When setting the “REC TYPE” of the setup menu “1.REC OUT SET” to “FIELD”.
-The image signal entered from the maximum 16 cameras is output in Field and recorded on the VCR.
-The recorded output records the only channel that the “REC DUTY” of the “1.REC OUT SET” is set to more than 1.
1/60sec(NTSC), 1/50(PAL)
2.TIME LAPSE record mode
-When setting the “REC TYPE” of the setup menu “1.REC OUT SET” to “TLV”.
-The image signal entered from the maximum 16 cameras is recorded on the VCR in response to the trigger signal of VCR.
-The recorded output records the only channel that the “REC DUTY” of the “1.REC OUT SET” is set to more than 1.
-The trigger out of VCR and the VTR terminal this unit must be connected.
-“NO TRIGGER” character is displayed on screen while operating the field record operation of the normal mode if the trigger signal is not received for 10 seconds.
Trigger output from TIME LAPSE VCR