Digital Multiplexer
Appendix B Checking points in trouble
There may be a case not to use system properly since unexpected status occurs while using the system. In this case, such status is actually caused by a critical error in system but a simple
The following items must be checked when problem occurs in the use of this unit.
When power does not turn on.
•Ensure power cord is properly inserted.
When screen does not appear though the power cord is inserted.
•Ensure connection to the camera, monitor output terminal is properly performed.
When record is not done.
•Ensure the connection between the
•Ensure the record tape inserted into VCR is set to RECORD PROHIBITION.
When record is not performed in the time lapse mode.
•Ensure the connection between the
•Ensure the “REC TYPE” of the “1.REC OUT SET” among the main menu is “TLV”.
•Ensure the REC trigger output terminal of the time lapse VCR is connected to the VTI terminal of this unit.
When record tape is not replayed.
•Ensure the connection between the
•Ensure the connection between the
When S-VHS record is not performed.
•Ensure the
•
When cannot see screen with the automatic switcher mode.
•Ensure the screen is now in the live mode.
•Ensure the time of “SEQUENCE” is set to “0” second.
The relevant channel is skipped when setting to “0” second.
NOTESimultaneously check even the operation status of the VCR connected when problem occurs in relation with VCR record/replay.
If problem is not solved even after checking above items and taking a step, always contact to the sale agency and request the help of expert.