Samsung SDM-160 SDM-090P, SDM-160MP, SDM-160P Rear panel, A. CAMERA INPUT / LOOP THROUGH OUT, B.ALARM IN / ALARM OUT / VTI TERMINAL, C.VCR IN/OUT (BNC), D. MONITOR OUT (BNC), E. SPOT OUT (BNC), H.RS-232C

Digital Multiplexer

Rear panel

ENGLISH

F G H A IBE C DJ

A. CAMERA INPUT / LOOP THROUGH OUT

-Up to 16 camera signals can be input. When transmitting camera signals to external devices, OUT terminal can be used.

B.ALARM IN / ALARM OUT / VTI TERMINAL

-VTI: TRIGGER Output Connection terminal of VCR

-ALARM IN: Up to 16 ALARM Sensors can be connected. “G” indicates grounding terminal connected to ALARM Input, and should be connected to grounding terminal of sensors.

-ALARM OUT (HOT/COLD): When ALARM is activated, ACTIVE MAKE Signal is generated.

-ALARM RESET : Connected to RESET terminal of VCR, and when ALARM is deactivated, PULSE is generated.

-MOTIOM OUT(M/O) : When MOTION is activated, ACTIVE MAKE signal is generated.

C.VCR IN/OUT (BNC)

Indicates terminal for connecting to VCR Input/Output.

D. MONITOR OUT (BNC)

Indicates terminal for connecting to Monitor’s video Input terminal.

E. SPOT OUT (BNC)

Indicates terminal for connecting to Monitor’s video Input terminal.

F. VCR IN/OUT (4PIN MINI DIN)

Indicates terminal for connecting to VCR’s S-VHS Input/Output terminal.✴SDM-160M/SDM-160MP:Not used.

G.MONITOR OUT (4PIN MINI DIN)

Indicates terminal for connecting to Monitor’s video S-VHS Input terminal.✴ SDM-160M/SDM-160MP:Not used.

H.RS-232C

With RS-232C cable, Remote Control can be done.

I. RS-485

With RS-485 cable, Remote Control can be done.

J. ~AC IN

Connects to Power Cord.

1-4