Samsung SDM-160 SDM-090P, SDM-160MP, SDM-160P When desiring to see the stop screen, When desiring to see in the zoom screen, 1.FREEZE setting of FULL screen, 2.FREEZE setting of division screen, ZOOM, ZOOM

Digital Multiplexer

When desiring to see the stop screen

The monitor screen (full screen and division) may be seen with a temporary stop.

A desired screen may be temporarily stopped selectively in the division screen indication mode.

1.FREEZE setting of FULL screen

The LED turns on and monitor image stops and “FREEZE” character is indicated on the screen if pressing the “FREEZE” button in the FULL screen mode. The LED turns off and the stop mode is released if pressing the “FREEZE” button once again.

2.FREEZE setting of division screen

The LED blinks if pressing the “FREEZE” button. The selected screen stops if selecting a channel to freeze, and “F” character is displayed. The selected channel is released if pressing the relevant channel again and stop of all channels if pressing the “FREEZE” button.

01/05/01	12:30:26	01/05/01	12:30:26
		F
		CH1	CH2
		Flash
FREEZE
CH1			F
		CH3	CH4
FULL screen		4-division screen

➢The “FREEZE” button does not operate in the following cases:-In setting division screen mode

-In setting of program mode

-In displaying ALARM/LOSS LIST on screen

When desiring to see in the zoom screen

The zoom screen operates if pressing “ZOOM” button in the FULL mode. The mode is changed in the following order whenever pressing this button.

FULL MODE ➞	2TIMES	➞	4 TIMES	➞ FULL MODE
	ZOOM		ZOOM

→	→	,	→	) button.
Select the area to expand using the “MOVE” ( ,→ ,

Moving to the diagonal direction is allowed using the double button (right upper, left below, right upper, right

below).

➢The “ZOOM” button does not operate in the following cases:-In division screen mode

-In setting division screen

-In setting of program mode

-In displaying ALARM/LOSS LIST on screen

4-4