Digital Multiplexer
Chapter 5. Setting of Program Menu
<MAIN MENU>
The following main menu is displayed on the monitor screen if pressing “MENU” button, the “MENU” LED turns on. The LED turns off if pressing the button and it returns to the previous status.
[SETUP MENU]
1.REC OUT SET
2.MON OUT SET
3.CHANNEL TITLE SET
4.DATE / TIME SET
5.ALARM SET
6.MOTION SET
7.SYSTEM SET
< SUB MENU>
- Select item 1~7 of the main menu using the “MOVE” button (→,→). - Press the “ENTER” button to move to the
1. Record setting of each camera
You can set record mode and record duty, ON/OFF, reservation of each channel. The following screen is displayed on screen if pressing the “ENTER” button after placing the blinking indication on the “1. REC OUT SET” by pressing the “MOVE” button from the main menu.
[REC OUT SET]
REC | TYPE | TLV |
REC | OUT | FIELD |
DUTY SET... |
| |
RESERVATION | OFF | |
- The blinking indication moves if pressing “→”, “→” button.
-The setting value is changed if pressing “→”, “→ ” button.
-The changed setting value is stored if pressing the “SET” button. You can return to the main menu.
REC TYPE : NOR ↔ TLV
•NOR : Used when connecting general VCR. Output is done in Field or Frame.
•TLV : Used when recording in the TLV mode by connecting the time lapse VCR.
-Output in the normal mode if no trigger signal exists though the setting is done in the TLV mode. REC OUT : FIELD ↔ FRAME : Effective menu if “REC TYPE” is “NOR”.
•FIELD : Output in 1/60 second (NTSC), 1/50 second (PAL)
•FRAME: Output in 1/30 second (NTSC), 1/25 second (PAL)
-Reservation : ON ↔ OFF