3Com 10/100BASE-T4 manual Connecting to the Network, PCI Computer with PCI and Eisa Slots

Connecting to the Network 2-3

EISA slot

PCI slot

Figure 2-1 PCI Computer with PCI and EISA Slots

The adapter’s backplate should be flush with the computer’s chassis. Be sure that the adapter’s connector fingers are completely seated in the slot.

6Replace the computer cover and reconnect all previously connected cables.

Refer to the documentation provided by the computer’s manufacturer for details on installing expansion boards.

Connecting to the Network

This section describes how to connect the Fast EtherLink 10/100BASE-T4 PCI adapter to the network.

You must connect the adapter to the network before loading drivers.

The backplate of the Fast EtherLink PCI adapter contains one RJ-45 connector, as shown in Figure 1-1. The adapter automatically senses and switches speed based on the type of hub to which it is connected.