Changing the Test Setup 4-9
Changing the Test Setup
To change the test parameters, follow these steps:
1Choose Test Setup from the Test menu in the main
window of the Configuration and Diagnostic Program, or
select the Test Setup button in the Run Tests dialog box.
2Press [Tab] to highlight any of the fields within the Test
Setup dialog box.
3To change a setting in any field, follow these steps:
aIn the Group Select box, use the arrow keys to select a
test group.
bIn the Group X Tests box, use the arrow keys to highlight a
test. Press the [Space Bar] to enable or disable an
individual test.
cIn the Repetitions box, specify the number of times you
want to run the tests, or use the arrow keys to select the
Continuous option.
dIn the Errors box, press the [Space Bar] to select or
deselect the Halt on Error parameter.
4When you are satisfied with the new test setup, highlight
the OK button and press [Enter].
5To run the tests, choose Run Tests from the Test menu and
select the Start button.
Miscellaneous Checks
Check for specific hardware problems, such as broken traces
or loose/broken solder connections.
If you have installed the adapter correctly and you still
experience problems, check the software.