44NETBUILDER SOFTWARE VERSION 11.1 RELEASE NOTES

Syntax Checking in PPP The ADD !<port> -PPP AuthRemoteUser command does not completely check for AuthRemoteUser syntactical correctness. If the trailing quotation mark is omitted from or misplaced Command in the user’s password, the system interprets the password as the string extending

to the last non-white space character in the line or the quotation mark. For example:

ADD !v1 -PPP ARU (“user”, “password)”

ADD !v1 -PPP ARU (“user”, “password)

Both passwords are interpreted as “password)”. No error message is generated.

UI Response Time With When NETBuilder bridge/router is configured with many SDLC PUs, SETDefault Large SDLC commands may take a long time to complete. Using the Defrag command to

configuration streamline the flash that contains the configuration files can fix the problem.

VTAM Program VTAM Program Temporary Fixes (PTFs) are required on a mainframe when APPN Temporary Fixes DLU services are used. Mainframe network management (NetView) services will

not function for downstream physical units (PUs) if the PTFs are not installed. VTAM Version 4.2 requires PTF #UW20787. VTAM Version 4.3 requires PTF #UW20788.

Visible symptoms of this problem can be seen as a lack of network management data for PUs that are downstream of a NETBuilder II bridge/router using APPN DLU services. The NetView message “AAU251I AAUDRTIB 02 UNEXPECTED SENSE CODE X'1002' ENCOUNTERED FOR TARGET=pu_name” is printed in the log file when this problem occurs.

Web Link Boundary If you use the Web Link application to display the Boundary Router Remote LAN Router Remote LAN Type Type of a Leaf Node, part of the display is truncated. Web Link returns the

Display configured RemoteLanType and displays the following message:

Actual=To be determined

However, Web Link does not return the actual RemoteLanType. To find out the actual RemoteLanType, access the NETBuilder bridge/router through Telnet or through the console port and enter:

SHow !<port> -BoundaryCentralNode RemoteLanType

Web Link Firewall The Firewall Service AddressList and UserDefService parameters are not Service Support configurable in the Web Link application. To configure these parameters, use

LoadConfig or the NETBuilder bridge/router user interface.

Web Link Login Support When you access the Web Link application for the first time, you are prompted to enter a username and password. This username and password remains valid on the NETBuilder bridge/router for two hours. Because most browers cache user login information, it is recommended that you log out of Web Link by selecting the “Logout” icon on the home page.

Web Link Reload Button The "Stop Reload" button on Web Link statistics screens does not toggle and if clicked, further reloading of the statistics data is stopped. To start reloading again, revisit/reload the page.

Page 43
Image 43
3Com 11.1 manual ADD !v1 -PPP ARU user, password