60

RSVP SERVICE PARAMETERS

11.1Release Notes, Reference for NETBuilder Family Software

Replace Chapter 60 with this chapter.

This chapter describes the Resource Reservation Protocol (RSVP) Service parameters. RSVP is used in multicasting applications like video conferencing, multimedia, and virtual private network (VPN) network management. RSVP permits host applications to request Quality of Service from the network.

Table 2 RSVP Service Parameters and Commands

Parameters

Commands

 

 

CONFiguration

SHow

CONFiguration

SETDefault, SHow

MaxFlowRate

SETDefault, SHow

REQuest

SHow

RESerVation

SHow

UDPEndcap

SETDefault, SHow

 

 

CONFiguration

Syntax SHow -RSVP CONFiguration

Default None

Description The CONFiguration parameter displays all RSVP configuration information for a PPP/Frame Relay port. The amount of bandwidth configured for RSVP via the PORT Service parameter, PROTocolRsrv, is displayed.

CONTrol

Syntax SETD -RSVP CONTrol = ENable DISable

SHow -RSVP CONTrol

Default DISable

Description The CONTrol parameter specifies whether the RSVP capability is enabled. If RSVP is disabled, all RSVP messages are forwarded as IP data packets.

Page 64
Image 64
3Com 11.1 manual Rsvp Service Parameters, Replace with this chapter